AKB336-M002 YOKOGAWA DCS Signal Cable

YOKOGAWA AKB336-M002 50-Pin Shielded CENTUM VP DCS Cable

YOKOGAWA AKB336-M002 50-Pin Shielded CENTUM VP DCS Cable

Availability: 10 left in stock

YOKOGAWA AKB336-M002 Signal Cable The YOKOGAWA AKB336-M002, also cataloged as the AKB336 Signal Cable, operates as a dedicated hardware component...

SKU: AKB336-M002

Manufacturer: Yokogawa
Product No.: AKB336-M002
Product Type: Signal Cables
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 600g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

YOKOGAWA AKB336-M002 Signal Cable

The YOKOGAWA AKB336-M002, also cataloged as the AKB336 Signal Cable, operates as a dedicated hardware component for high-density interconnection within CENTUM VP/CS network platforms. The passive multi-core assembly contains 50 pins to execute point-to-point shielded signal transmission inside industrial control cabinets. This component establishes the direct electrical connection path that routes low-voltage analog and digital control loops between field I/O modules and localized terminal boards.

Hardware Specifications

Parameter	Specification
Model	AKB336-M002
Brand	Yokogawa
Origin	Japan
Weight	0.6 kg
Dimensions	200 x 1.3 x 1.3 cm (2.0 meters total length)
Operating Temp	-20 to +60 deg C
Power Consumption	Passive cable (0 W)
Cable Type	High-density multi-core signal cable
Connector Side A	50-pin high-density connector
Connector Side B	50-pin high-density connector
Rated Voltage	30 VAC/DC maximum
Rated Current	1 A per pin maximum
Withstanding Voltage	500 VAC for 1 minute
Insulation Resistance	100 Mohm or greater at 500 VDC
Conductor Resistance	120 ohm/km or less at 20 deg C
Minimum Bending Radius	80 mm
Shielding Structure	Braided copper + aluminum foil
Sheath Material	Flame-retardant PVC
HS Code	8537101190

Process Control & DCS Module Attributes

The interconnection assembly utilizes dedicated shielding boundaries to support the 4-20 mA HART loop protocol across dense cabinet arrays. Dual-layer braided copper and aluminum foil wrapping maintains strict channel-to-channel isolation, preventing signal deterioration between adjacent voltage loops. This construction blocks external electromagnetic interference (EMI) from corrupting low-voltage signal waveforms. The factory-molded 50-pin connections preserve high-integrity lines to field control stations, eliminating terminal voltage drops and stabilizing cold junction compensation (CJC) reference paths at the connected terminal boards.

Frequently Asked Questions

Q: Can installation technicians cut or shorten the 2.0 meter cable to fit custom layout dimensions?

A: No, field modification ruins factory calibration and damages the internal shielding structure. Altering the jacket voids the technical tolerances for conductor resistance and insulation limits.

Q: How does the cable infrastructure mitigate high-frequency electrical interference from neighboring switchgear?

A: The combined aluminum foil layer and braided copper shield intercept radio frequency and electromagnetic fields, routing the induced electrical currents safely away from the internal 50-pin signal cores.

Field Installation Guidelines

Connector Engagement Alignment: Direct the 50-pin male plug straight into the module header port to prevent pin bending. Tighten all integrated retaining screws or latching clips fully to lock the physical junction against machine vibrations.
Bending Radius Enforcement: Route the multi-core body through dedicated cabinet wireways, ensuring the assembly maintains a bending radius larger than 80 mm. Sharp turns compress the inner insulation layers and induce conductor stress fractures.
Shield Grounding Connection: Terminate the integrated ground drain wire at the designated chassis grounding bar inside the CENTUM cabinet enclosure. Keep ground terminations uniform at a single point to prevent circulating ground currents from introducing signal noise.
Power Line Separation distance: Maintain a minimum physical spacing separation of 100 mm between these low-voltage signal wires and heavy AC power distribution mains to eliminate inductive noise coupling.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.