Yokogawa ATA4S-10 ATA4S CENTUM VP Terminal Block

Availability: 10 left in stock

Yokogawa ATA4S-10 Pressure Clamp Terminal Block The Yokogawa ATA4S-10, also cataloged as the ATA4S Terminal Block, operates as a dedicated...

SKU: ATA4S-10

Manufacturer: Yokogawa
Product No.: ATA4S-10
Product Type: Terminal Blocks
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 200g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Yokogawa ATA4S-10 Pressure Clamp Terminal Block

The Yokogawa ATA4S-10, also cataloged as the ATA4S Terminal Block, operates as a dedicated hardware component for connecting field devices (analog input, thermocouple, millivolt signals) to CENTUM VP analog I/O modules within DCS node units.

Hardware Specifications

Parameter	Specification
Model	ATA4S-10
Brand	Yokogawa
Origin	Japan
Weight	0.2 kg
Dimensions	32.6 x 114 x 60.5 mm
Operating Temp	0 deg C to +55 deg C
Power Consumption	Passive physical connection interface
Number of Channels	16 analog channels
Connection Type	Pressure clamp (screwless, tool-free)
Supported Signals	Analog input, thermocouple, millivolt
Surge Protection	Integrated surge absorber
Environmental Standard	ISA G3 compliant

Process Control Signal Routing & Loop Isolation

The ATA4S-10 terminal block routes 16 independent analog input, thermocouple, or millivolt loops directly into CENTUM VP I/O cards while suppressing field-induced transient spikes via its integrated surge absorber. Operating within 4-20 mA HART loop protocol architectures, the terminal hardware provides physical point isolation to prevent line noise, electrical crosstalk, and field ground loops from degrading analog signal accuracy across control networks.

Frequently Asked Questions

Q: How does the tool-free pressure clamp mechanism maintain wire retention under high-vibration conditions?

A: The spring-actuated pressure clamps exert continuous mechanical force on landed wire ends, which prevents contact resistance shifts and eliminates terminal loosening caused by physical cabinet vibration.

Q: What protection does the integrated surge absorber provide against field voltage transients?

A: Built-in surge protection elements clamp high-voltage spikes caused by lightning or inductive switching before energy propagates into delicate backplane logic and input conditioning circuits.

Q: What environmental coating specification applies to the ATA4S-10 terminal assembly?

A: The unit features conformal coating compliant with the ISA G3 environmental standard, which prevents atmospheric corrosion of conductive surfaces in harsh chemical environments.

Field Installation Guidelines

Technicians must snap the ATA4S-10 module onto a standard DIN rail or mount it directly to cabinet panels using designated mounting tabs. Field crews strip signal wire ends to specified lengths and insert conductors directly into the pressure clamp slots without screw torqueing. Installers must route shield wires directly to the main instrumentation ground bus to eliminate loop noise and optimize surge suppression grounding paths.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.