Yokogawa ATI3S-00 S2 Terminal Module
Configured for signal termination in CENTUM VP and CS 3000 environments, the Yokogawa ATI3S-00 (ATI3S-00 Terminal Module) provides direct physical electrical execution for analog and pulse signal integration.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | ATI3S-00 |
| Brand | Yokogawa |
| Origin | USA |
| Weight | 0.2 kg |
| Dimensions | 120 mm x 80 mm x 40 mm |
| Operating Temp | -40 deg C to +85 deg C |
| Power Consumption | 24 V DC nominal |
| Signal Capacity | 8 channels (AAI135/AAP135) or 4 input/4 output (AAI835) |
| Dielectric Strength | 1500 V AC for 1 minute |
DCS Process Control and Signal Integration
The ATI3S-00 facilitates the acquisition of thermocouple, RTD, millivolt, and resistance sensor inputs, converting these inputs into 4-20 mA HART loop protocol outputs. To maintain signal precision, the module utilizes integrated cold junction compensation (CJC), which corrects for thermal gradients at the terminal connection points. Galvanic isolation between the input, output, and power circuits protects the control system from field-side surges and ground loops. This architecture ensures stable signal transmission across the FIO subsystem, adhering to stringent EMC requirements necessary for high-accuracy process measurement.
Frequently Asked Questions
Q: How does the module maintain accuracy for thermocouple inputs?
A: The module executes integrated cold junction compensation (CJC) algorithms that calculate the temperature at the terminal block, applying the necessary offset to the thermocouple reading to ensure precise conversion to the 4-20 mA output.
Q: Is this terminal module compatible with all Yokogawa FIO series modules?
A: It is designed specifically for use with AAI135, AAP135, and AAI835 analog/pulse modules. Verify the specific channel configuration requirements against the target I/O module before installation.
Q: Does the module require additional surge protection?
A: This specific variant (ATI3S-00) does not include an integrated surge absorber. If the installation environment presents high transient voltage risks, supplemental external surge protection devices must be installed on the field wiring.
Field Installation Guidelines
- Mounting and Clearance: Ensure the terminal module is mounted securely in a cabinet environment that provides sufficient air circulation. Maintain the specified temperature range (-40 deg C to +85 deg C) to prevent thermal drift of the analog components.
- Wiring Standards: Utilize shielded twisted-pair cabling for all signal inputs to minimize inductive interference. Route field wiring through segregated cable trays away from high-voltage AC power conductors.
- Grounding and Shielding: Connect cable shields to the cabinet ground bar at the entry point. Ensure that the module's frame ground is bonded to the common cabinet chassis ground to maintain effective galvanic isolation and EMC compliance.
- Terminal Torque: Tighten pressure clamp terminals to the manufacturer's specified torque rating to prevent high-resistance connections and potential mechanical loosening caused by vibration.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
NFTR8S-10 S2 Yokogawa STARDOM Terminal Block Analog Module
$99.00
$199.00
S9345FA Yokogawa ESB N-ESB Bus Connector Interface Module
$99.00
$199.00
YOKOGAWA AKB331-M020 50-Pin Signal Cable for FIO Modules
$99.00
$199.00
YOKOGAWA YCB301-C600 CENTUM VP ESB Bus Interface Cable
$99.00
$199.00
ATD5A-00 S1 KS YOKOGAWA Cable Interface Adapter Module
$99.00
$199.00
Yokogawa TE16*B CENTUM VP Field I/O Terminal Block
$99.00
$199.00
TERT*A Yokogawa Field I/O Terminal Block
$99.00
$199.00
SARM55C Yokogawa Terminal Board Digital Output Module
$99.00
$199.00
ICS Triplex T9300 Trusted Safety System I/O Backplane
$99.00
$199.00
330101-00-08-20-02-05 Extension Cable | Bently Nevada
$99.00
$199.00
16925-99 | Bently Nevada | Interconnect Cable
$99.00
$199.00
Bently Nevada 16925-25 Interconnect Cable
$99.00
$199.00
16925-20 | Bently Nevada | Interconnect Cable
$99.00
$199.00
Bently Nevada 16925-17 Interconnect Cable
$99.00
$199.00
16925-10 | Bently Nevada | Interconnect Cable
$99.00
$199.00
Bently Nevada 16710-99 Interconnect Cable
$99.00
$199.00
Bently Nevada 16710-30 Interconnect Cable
$99.00
$199.00
TSXBLY01 Schneider Electric Modicon Premium Terminal Block
$99.00
$199.00
Schneider Electric BMXXBP0800 Modicon X80 Backplane
$99.00
$199.00
140XBE10000 Schneider Quantum 12-16 Slot Backplane Expander
$99.00
$199.00
BMXFCW303 Schneider Modicon X80 40-Way 3m Connection Cable
$99.00
$199.00
BMXXBP0600 Schneider Modicon X80 6-Slot Backplane
$99.00
$199.00
Yokogawa AEA4D-01 Terminal Board for Analog Signals
$99.00
$199.00
Yokogawa ATF9S-00 Pressure Clamp Terminal Block
$99.00
$199.00
ATD5S-00 Yokogawa Terminal Block Unit | New & Original Stock
$99.00
$199.00
TE32 Yokogawa Terminal Block Module | New & Original Stock
$99.00
$199.00
Yokogawa ACCC01 Cable Connector Cover | New & Original Stock
$99.00
$199.00
Z-7126 HIMA Digital Input Module Cable Plug | New Stock
$99.00
$199.00
P0926GH Foxboro Channel Communication Terminal | New Stock
$99.00
$199.00
0916ND FOXBORO Base-to-Base Cable | New & Original Stock
$99.00
$199.00
Guide
Translation missing: en.general.search.loading