SBA4D-06 Yokogawa CENTUM VP Datasheet & Technical Manual

Yokogawa SBA4D-06 CENTUM VP FIO Terminal Board

Yokogawa SBA4D-06 CENTUM VP FIO Terminal Board

Availability: 10 left in stock

Yokogawa SBA4D-06 Analog Terminal Board The Yokogawa SBA4D-06, also cataloged as the SBA4D Analog Terminal Board, operates as a dedicated...

SKU: SBA4D-06

Manufacturer: Yokogawa
Product No.: SBA4D-06
Product Type: Terminal Boards
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 300g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Yokogawa SBA4D-06 Analog Terminal Board

The Yokogawa SBA4D-06, also cataloged as the SBA4D Analog Terminal Board, operates as a dedicated hardware component for connecting field analog signals to FIO I/O modules within CENTUM VP and ProSafe-RS control architectures.

Suffix Breakdown & Model Matrix

Code	Option / Specification	Description
SBA4D	Base Model	Terminal Board for Analog (single and dual-redundant, 16-channel x 1, DIN rail mount)
-0	Standard Code	Always 0
6	Protection / Environmental Type	With ISA Standard G3 conformal coating and no explosion protection

Hardware Specifications

Parameter	Specification
Model	SBA4D-06
Brand	Yokogawa
Origin	Japan
Weight	0.30 kg (Net), 2.0 kg (Shipping)
Dimensions	26.3 cm x 13.8 cm x 8.8 cm
Operating Temp	-10 to +60 deg C
Power Consumption	Passive field terminal interface unit
System Compatibility	CENTUM VP / CS 3000 / ProSafe-RS FIO Systems
Channel Capacity	Single and dual-redundant setups (8-point x 1 or 16-point x 1)
Field Connection	Pressure clamp terminals, KS cable adapter, or MIL connector
Compatible Modules	AAI135, AAI835, AAP135, AAI141, AAV141, AAV144, AAB841, AAI841, AAV544, AAI143, AAI543
Insulation Resistance	Minimum 10 M ohm at 500 VDC
Withstanding Voltage	500 VAC for 1 minute

Process Control and DCS Connectivity

The SBA4D-06 terminal board provides structured signal routing to bridge field instruments with FIO analog input and output cards. Featuring ISA Standard G3 conformal coating for harsh industrial environments, the pressure clamp terminal interface maintains low-resistance connections for 4-20 mA HART loop protocol transmitters and valve positioners. Integrated bus paths accept single and dual-redundant module connections, permitting continuous signal cross-routing without secondary bridge wiring or external signal splitters.

Frequently Asked Questions

Q: What does the -06 suffix code indicate on the SBA4D terminal board?

A: The -06 suffix designates compliance with ISA Standard G3 environmental protection (conformal coating) for corrosive atmospheres, built without explosion protection rating.

Q: How are field instruments wired to the SBA4D-06 interface?

A: Signal wires connect directly via integrated pressure clamp screw terminals or route through external KS interface cables and MIL connectors.

Field Installation Guidelines

Mount the SBA4D-06 unit onto a standard 35 mm DIN rail inside the marshalling cabinet, verifying that the bottom locking mechanism clips securely over the rail flange. Strip field conductors to the designated length before securing them into pressure clamp terminals, applying torque within manufacturer limits to prevent wire shearing. When using KS or MIL connectors for module link cables, verify that wire latches fully engage to prevent vibration-induced signal loss. Connect cabinet earth ground directly to the terminal board grounding pad to ensure proper cable shield drain termination.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.