Yokogawa YCB301-C300 CENTUM VP ESB Bus Cable 3m

Availability: 20 left in stock

Yokogawa YCB301-C300 ESB Bus Cable The Yokogawa YCB301-C300, also cataloged as the YCB301 ESB Bus Cable (36-36 pins), operates as...

SKU: YCB301-C300

Manufacturer: Yokogawa
Product No.: YCB301-C300
Product Type: Bus Cables
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 800g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Yokogawa YCB301-C300 ESB Bus Cable

The Yokogawa YCB301-C300, also cataloged as the YCB301 ESB Bus Cable (36-36 pins), operates as a dedicated hardware component for high-speed inter-node data transmission and signal routing within CENTUM VP control systems.

Suffix Breakdown & Model Matrix

Code	Option / Specification	Description
YCB301	Base Model	ESB Bus Cable (36-36 pins)
-C300	Cable Length	Cable length 3 m

Hardware Specifications

Parameter	Specification
Model	YCB301-C300
Brand	Yokogawa
Origin	Japan
Weight	0.8 kg (Net), 1.5 kg (Shipping)
Dimensions	Cable length 3 m (36-pin to 36-pin connector)
Operating Temp	-20 to +60 deg C
Power Consumption	Passive bus component
Cable Type	ESB Bus Cable (36-36 pins)
Connector Type	Dual 36-pin high-density connectors
Bus Protocol	ESB bus communication
Environmental Limits	Humidity 5 to 95% RH (non-condensing)
System Platform	CENTUM VP / ProSafe-RS

Process Control and DCS Connectivity

Designed for high-integrity inter-unit interconnectivity, the YCB301-C300 cable bridges communication nodes across the ESB bus architecture. It transfers high-frequency digital control signals and process variables between the Field Control Unit (FCU) and system extension nodes. Integrated shielding ensures comprehensive channel-to-channel isolation and EMI suppression, preventing ground loops and signal corruption across distributed process control loops, including 4-20 mA HART loop protocol interfaces.

Frequently Asked Questions

Q: What physical connectors are integrated on the YCB301-C300 cable?

A: The cable is terminated with dual 36-pin high-density male connectors designed for direct engagement with ESB bus interface ports.

Q: Can the YCB301-C300 cable be hot-swapped during active DCS operation?

A: Disconnecting the primary ESB bus cable during operation interrupts node communication; redundant bus configurations must be active and validated before replacing an individual cable line.

Field Installation Guidelines

Inspect the 36-pin connectors on the YCB301-C300 for bent pins or debris prior to installation. Align the connector squarely with the ESB bus interface port on the module or base unit, then press firmly until fully seated. Tighten the integral side locking screws using a standard screwdriver to ensure solid electrical grounding and prevent accidental disconnection due to field vibration. Route the 3 m cable away from heavy AC power wiring, variable frequency drives, and high-voltage conduits to eliminate cross-talk and electromagnetic interference. Maintain minimum bending radius limits along the cable run to avoid internal conductor stress.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.