The Bently Nevada 330103-00-03-10-01-00 serves as the primary 330103 Proximity Probe utilized to execute vibration and displacement monitoring across 3300 XL Transducer System platforms. The passive hardware component utilizes eddy-current inductive loop properties to monitor raw physical gap variations between the sensor face and a moving conductive metal shaft, generating high-frequency signal fluctuations without direct physical contact.
Suffix Breakdown & Model Matrix
- 330103: Base component designator for the 3300 XL 8 mm proximity probe configuration featuring an M10 x 1 metric thread structure without armor.
- -00: Unthreaded length option, indicating 0 mm of smooth barrel.
- -03: Overall case length option, indicating a 30 mm total threaded body length.
- -10: Total length option, establishing a 1.0 metre (3.3 feet) integrated cable path.
- -01: Connector and cable option designating a miniature coaxial ClickLoc connector with an integrated connector protector and standard electrical cable core.
- -00: Agency approval option, indicating that hazardous area certification is not required for the final deployment position.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 330103-00-03-10-01-00 |
| Brand | Bently Nevada |
| Origin | USA |
| Weight | Approx. 0.35 kg (1.5 kg shipping weight) |
| Dimensions | 8 mm probe tip diameter, 30 mm case length, M10 x 1 metric thread |
| Operating Temp | -51 deg C to +177 deg C |
| Power Consumption | Passive sensor driven via external Proximitor loop supply |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Connection Type | ClickLoc miniature coaxial interface |
Mechanical Monitoring & TSI Technical Attributes
The probe driver requires strict matching to a verified target metallurgy to sustain linear eddy-current probe scaling accuracy across the measured spectrum. During mechanical commissioning, field engineers must execute a gap voltage validation protocol, adjusting the physical depth of the metric body until the quiescent DC level measures exactly -10 VDC at the geometric center of the linear calibration envelope. Proper physical alignment tracks real-time rotor dynamics under high velocity while filtering thermal errors. Cross-talk suppression is maintained via continuous internal coaxial shielding braid, mitigating electrical interference when multiple probe channels route through close-proximity machine penetrations.
Frequently Asked Questions
Q: What is the mechanical function of the -01 suffix connector protector option?
A: The connector protector physically seals the miniature coaxial ClickLoc connection point, maintaining insulation resistance and protecting the gold-plated contacts from fluid ingress, oil mist, and structural ground loops within the machine housing.
Q: Can this M10 x 1 metric thread probe be coupled directly to an extension cable designed for an imperial probe?
A: Yes, the electrical parameters of the ClickLoc coaxial interface remain standardized across both imperial and metric 3300 XL 8 mm platforms, though the physical installation threads differ.
Q: How is the power consumption managed for this specific module?
A: This probe is entirely passive and consumes no direct DC electrical power. It is excited solely by the high-frequency RF signal delivered from the connected 3300 XL Proximitor Sensor.
Field Installation Guidelines
- Clean out the M10 x 1 metric threaded mounting port completely, verifying that the bore is clear of metal shavings, burrs, or grease.
- Advance the 30 mm stainless steel case into the threaded penetration by hand to prevent cross-threading or tip scoring.
- Apply a digital voltmeter to the Proximitor Sensor terminal blocks to capture the live output potential during depth adjustment.
- Rotate the probe body until the gap voltage validation registers the nominal baseline of -10 VDC, indicating the correct spatial linear region.
- Secure the structural locknut tightly against the machine face to fix the calibrated gap, and slide the connector protector over the ClickLoc link to seal the assembly from moisture.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
Bently Nevada 330101-00-12-05-02-05 Proximity Probe
$99.00
$199.00
330101-00-12-10-02-05 | Bently Nevada | Proximity Probe
$99.00
$199.00
330101-00-10-10-02-CN Bently Nevada Proximity Probe
$99.00
$199.00
330101-00-08-20-02-05 Extension Cable | Bently Nevada
$99.00
$199.00
Bently Nevada 330101-00-08-10-02-00 Proximity Probe
$99.00
$199.00
Bently Nevada 330101-00-08-05-02-00 Proximity Probe
$99.00
$199.00
Guide
Translation missing: en.general.search.loading