The GE IS200VTURH1BAB, also cataloged as the IS200VTUR Vibration Transducer Module, operates as a dedicated hardware component for primary turbine protection and speed sensing within GE Mark VI Speedtronic control systems. The module interface handles 6 analog voltage input channels alongside 4 passive pulse rate device inputs to provide primary overspeed trip signaling and turbine synchronization monitoring.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IS200VTURH1BAB |
| Brand | General Electric |
| Origin | USA |
| Weight | 0.5 kg |
| Dimensions | 11 x 9 x 3 in |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 12 W (VME backplane power bus) |
| Module Function | Primary turbine protection and speed sensing |
| Analog Inputs | 6 voltage channels |
| Speed Sensing Inputs | 4 passive pulse rate device channels |
| Common Mode Voltage | 125 VDC |
| System Platform | Mark VI Speedtronic Control System |
Deterministic Network Integration and Backplane Processing
The IS200VTURH1BAB maintains backplane bus communication velocity across the VME chassis to process speed sensing pulses and trip logic without delay. Onboard firmware flash compatibility enables real-time synchronization with primary controller software loops. High I/O density scaling allows dedicated analog signal conditioning for vibration inputs while simultaneously executing primary trip voting algorithms across Mark VI system architectures.
Frequently Asked Questions
Q: What speed measurement devices interface directly with the IS200VTURH1BAB module?
A: The module contains dedicated processing circuitry for up to 4 passive pulse rate speed sensors (such as magnetic pickups) to monitor shaft rotation speed.
Q: Is the IS200VTURH1BAB backward-compatible with earlier VTUR board hardware?
A: Yes. The IS200VTURH1BAB is backward-compatible with the first two revisions of the VTUR module within supported GE Mark VI Speedtronic racks.
Q: Can the IS200VTURH1BAB be replaced while the VME backplane is powered?
A: Hot-swapping is not supported. The VME rack power supply must be isolated before removing or installing the board to protect backplane pin connections and signal converters.
Field Installation Guidelines
Mount the IS200VTURH1BAB into its assigned 6U VME rack slot, verifying alignment along the chassis card guides before seating the backplane connectors. Secure top and bottom panel screws to ensure solid electrical grounding with the rack enclosure frame. Route all passive speed pickup wires and analog voltage cables using shielded twisted-pair conductors, keeping them separated from AC power lines. Connect cable shields to cabinet ground terminals at a single point prior to powering the rack.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
IS200WNPSH1ABA Mark VI Power Supply Daughter Card | GE Fanuc
$99.00
$199.00
GE IS200TBAIH1CDC Mark VI Analog Input Terminal Board
$99.00
$199.00
GE IS200BPAIH1ACB Mark VI Analog I/O Processor Board
$99.00
$199.00
IS200EGDMH1AGG EX2100 Ground Detection Module | GE
$99.00
$199.00
GE IS200EGDMH1AEF EX2100 Exciter Ground Detector Module
$99.00
$199.00
IS200EGDMH1ADE GE Exciter Bridge and Protection Module
$99.00
$199.00
GE IS200VTCCH1CBB Mark VI Thermocouple Input Board
$99.00
$199.00
GE Mark VI VME RTD Input Card | IS200VRTDH1DAB
$99.00
$199.00
GE IS200VCMIH1BCD Mark VI VME Bus Master Control Board
$99.00
$199.00
IS200VAICH1CBA GE Analog I/O VME Card
$99.00
$199.00
GE IS220PDIAH1A Mark VIe Discrete Contact Input Module
$99.00
$199.00
IS200EROCH1ABC GE EX2100 Exciter Regulator Option Card
$99.00
$199.00
GE IS200ERDDH1ABB EX2100 Exciter Regulator Board
$99.00
$199.00
IS200TRLYH1BGE GE Mark VI Termination Relay Card
$99.00
$199.00
GE IS200ESELH1AAA EX2100 Exciter Selector Board
$99.00
$199.00
GE IS420UCSCS2A Mark VIeS Dual Core Safety Controller Module
$99.00
$199.00
GE Mark V DS200FSAAG1A Field Supply Amplifier
$99.00
$199.00
GE IS200EDCFG1A Exciter DC Feedback Board
$99.00
$199.00
General Electric IS220PSVOH1A Mark VIe Servo Control Module
$99.00
$199.00
General Electric IS220PDOAH1B Mark VIe Digital Output Module
$99.00
$199.00
General Electric IS200TDBTH2ACD Mark VIe PDIO Terminal Board
$99.00
$199.00
GE Fanuc DS200ADPBG1A Genius I/O Adapter Board
$99.00
$199.00
GE Fanuc IS200VSVOH1B Mark VI Servo Control Board
$99.00
$199.00
GE DS3800DMPK1E1D Mark IV General Regulator Board
$99.00
$199.00
DS200FCGDH1B GE Mark VI Gate Distribution and Status Card
$99.00
$199.00
GE DS200LRPAG1A Speedtronic Mark V Line Protection Card
$99.00
$199.00
GE DS200TCCBG8B Mark V LM Common Extended Analog I/O Board
$99.00
$199.00
DS200TBCAG1A GE Mark V RTD Termination Module
$99.00
$199.00
GE DS200UPLAG1B Mark V LAN Power Supply Card
$99.00
$199.00
DS2020EXPSG3 EX2000 Exciter Power Supply Board | GE
$99.00
$199.00
DS200CPCAG1A | GE | EX2000 Contactor Pilot Board
$99.00
$199.00
GE Fanuc DS200SHVMG1A Mark V High Voltage Interface Board
$99.00
$199.00
GE DS200TCRAG1A Relay Output Board | Mark V LM
$99.00
$199.00
GE DS200FGPAG1A LS2100 Gate Pulse Amplifier Board
$99.00
$199.00
GE DS200TCQAG1A Mark V Analog I/O Board
$99.00
$199.00
DS200TCEAG1B GE Mark V Emergency Overspeed Board
$99.00
$199.00
GE DS200SLCCG3A Mark V & EX2000 LAN Communication Card
$99.00
$199.00
GE DS200TCQCG1A Mark V RST Overflow Board
$99.00
$199.00
DS200TCEBG1A GE Mark V Protective Termination Expander Board
$99.00
$199.00
GE DS200TCEAG1A Mark V Emergency Overspeed Board
$99.00
$199.00
Guide
Translation missing: en.general.search.loading