The GE IS210AEBIH1BOA, also cataloged as the IS210AEBI Analog Expansion Bridge Interface Card, operates as a dedicated hardware component for interfacing sensors and actuators within Mark VIe Distributed Control System platforms. This PCB module processes incoming analog signaling and translates control commands across the local system bus under direct 24 VDC nominal power distribution.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IS210AEBIH1BOA |
| Brand | GE |
| Origin | United States |
| Weight | 0.5 kg |
| Dimensions | 22.5 x 15.5 x 5.2 cm |
| Operating Temp | -20 to +70 deg C |
| Power Consumption | 24 VDC nominal |
| Storage Temp | -40 to +85 deg C |
| Relative Humidity | 5% to 95% non-condensing |
| System Compatibility | Mark VIe Distributed Control System |
Backplane Bus and I/O Density Scaling
The IS210AEBIH1BOA provides internal backplane bus communication velocity needed to maintain deterministic data paths across expansion racks. High I/O density scaling allows direct connection to multiple field sensors and output actuators without degrading overall loop execution speeds. Onboard flash firmware compatibility ensures consistent interface timing across diverse Mark VIe cabinet architectures.
Frequently Asked Questions
Q: How should power wiring be connected to ensure proper operating voltage?
A: The board operates from a nominal 24 VDC supply. Ensure field power connections meet specified voltage tolerances and are routed through dedicated fused terminal blocks to maintain power integrity.
Q: What are the thermal storage limits when storing spare units?
A: Uninstalled cards must be stored within a ambient temperature range of -40 to +85 deg C with non-condensing relative humidity between 5% and 95%.
Q: Does the card require specialized grounding during handling and installation?
A: Yes. As an unshielded circuit board assembly, proper ESD precautions including a grounded wrist strap must be utilized during handling to prevent damage to onboard semiconductors.
Field Installation Guidelines
Mount the card into the designated Mark VIe card slot using standard guide rails, ensuring all retention screws are fully tightened to secure physical grounding to the enclosure chassis. Run all analog signal cabling separate from high-voltage AC lines in grounded metal conduits. Ensure signal cable shields are grounded at a single point near the cabinet entry plane to prevent ground loops and electromagnetic noise interference. Maintain ambient operating temperatures within -20 to +70 deg C via cabinet forced-air convection.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
IS200WNPSH1ABA Mark VI Power Supply Daughter Card | GE Fanuc
$99.00
$199.00
GE IS200TBAIH1CDC Mark VI Analog Input Terminal Board
$99.00
$199.00
GE IS200BPAIH1ACB Mark VI Analog I/O Processor Board
$99.00
$199.00
IS200EGDMH1AGG EX2100 Ground Detection Module | GE
$99.00
$199.00
GE IS200EGDMH1AEF EX2100 Exciter Ground Detector Module
$99.00
$199.00
IS200EGDMH1ADE GE Exciter Bridge and Protection Module
$99.00
$199.00
IS200VTURH1BAB | GE | Mark VI Turbine Protection Module
$99.00
$199.00
GE IS200VTCCH1CBB Mark VI Thermocouple Input Board
$99.00
$199.00
GE Mark VI VME RTD Input Card | IS200VRTDH1DAB
$99.00
$199.00
GE IS200VCMIH1BCD Mark VI VME Bus Master Control Board
$99.00
$199.00
IS200VAICH1CBA GE Analog I/O VME Card
$99.00
$199.00
GE IS220PDIAH1A Mark VIe Discrete Contact Input Module
$99.00
$199.00
IS200EROCH1ABC GE EX2100 Exciter Regulator Option Card
$99.00
$199.00
GE IS200ERDDH1ABB EX2100 Exciter Regulator Board
$99.00
$199.00
IS200TRLYH1BGE GE Mark VI Termination Relay Card
$99.00
$199.00
GE IS200ESELH1AAA EX2100 Exciter Selector Board
$99.00
$199.00
GE IS420UCSCS2A Mark VIeS Dual Core Safety Controller Module
$99.00
$199.00
GE Mark V DS200FSAAG1A Field Supply Amplifier
$99.00
$199.00
GE IS200EDCFG1A Exciter DC Feedback Board
$99.00
$199.00
General Electric IS220PSVOH1A Mark VIe Servo Control Module
$99.00
$199.00
General Electric IS220PDOAH1B Mark VIe Digital Output Module
$99.00
$199.00
General Electric IS200TDBTH2ACD Mark VIe PDIO Terminal Board
$99.00
$199.00
GE Fanuc DS200ADPBG1A Genius I/O Adapter Board
$99.00
$199.00
GE Fanuc IS200VSVOH1B Mark VI Servo Control Board
$99.00
$199.00
GE DS3800DMPK1E1D Mark IV General Regulator Board
$99.00
$199.00
DS200FCGDH1B GE Mark VI Gate Distribution and Status Card
$99.00
$199.00
GE DS200LRPAG1A Speedtronic Mark V Line Protection Card
$99.00
$199.00
GE DS200TCCBG8B Mark V LM Common Extended Analog I/O Board
$99.00
$199.00
DS200TBCAG1A GE Mark V RTD Termination Module
$99.00
$199.00
GE DS200UPLAG1B Mark V LAN Power Supply Card
$99.00
$199.00
DS2020EXPSG3 EX2000 Exciter Power Supply Board | GE
$99.00
$199.00
DS200CPCAG1A | GE | EX2000 Contactor Pilot Board
$99.00
$199.00
GE Fanuc DS200SHVMG1A Mark V High Voltage Interface Board
$99.00
$199.00
GE DS200TCRAG1A Relay Output Board | Mark V LM
$99.00
$199.00
GE DS200FGPAG1A LS2100 Gate Pulse Amplifier Board
$99.00
$199.00
GE DS200TCQAG1A Mark V Analog I/O Board
$99.00
$199.00
DS200TCEAG1B GE Mark V Emergency Overspeed Board
$99.00
$199.00
GE DS200SLCCG3A Mark V & EX2000 LAN Communication Card
$99.00
$199.00
GE DS200TCQCG1A Mark V RST Overflow Board
$99.00
$199.00
DS200TCEBG1A GE Mark V Protective Termination Expander Board
$99.00
$199.00
GE DS200TCEAG1A Mark V Emergency Overspeed Board
$99.00
$199.00
Guide
Translation missing: en.general.search.loading