330905-00-25-05-02-05 Bently Nevada Proximity Sensors

Bently Nevada 330905-00-25-05-02-05 3300 NSv Proximity Probes

Bently Nevada 330905-00-25-05-02-05 3300 NSv Proximity Probes

Disponibilidad: 10 Quedan en stock

Configured for non-contact shaft displacement and dynamic vibration measurement in 3300 NSv Machinery Monitoring System platforms, the Bently Nevada 330905-00-25-05-02-05...

Código: 330905-00-25-05-02-05

Manufacturer: Bently Nevada
Product No.: 330905-00-25-05-02-05
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 1500g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

Configured for non-contact shaft displacement and dynamic vibration measurement in 3300 NSv Machinery Monitoring System platforms, the Bently Nevada 330905-00-25-05-02-05 (330905 Proximity Sensors) provides direct physical/electrical execution. Constructed with an unarmored M10 x 1 AISI 304 stainless steel threaded body, this transducer features a 0 mm unthreaded length, a 250 mm overall case length, and a 0.5 m (20 in) FEP-insulated coaxial cable terminated with a miniature ClickLoc connector and multiple agency approvals.

Suffix Breakdown & Model Matrix

Option Code	Parameter Designation	Selected Configuration
330905	Base Model	3300 NSv Probe, M10 x 1 thread, without armor
-00	Unthreaded Length	0 mm
-25	Overall Case Length	250 mm
-05	Total Length Option	0.5 m (20 in)
-02	Connector & Cable Type	Miniature coaxial ClickLoc connector, standard cable
-05	Agency Approval Option	Multiple approvals (CSA, ATEX, IECEx)

Hardware Specifications

Parameter	Specification
Model	330905-00-25-05-02-05
Brand	Bently Nevada
Origin	United States
Weight	1.5 kg
Dimensions	M10 x 1 thread profile (250 mm overall case length)
Operating Temp	-34 deg C to +177 deg C (-30 deg F to +351 deg F)
Power Consumption	Passive transducer (Powered via Proximitor Sensor)
Storage Temp	-51 deg C to +177 deg C (-60 deg F to +351 deg F)
Probe Tip Material	Polyphenylene sulfide (PPS)
Probe Case Material	AISI 304 stainless steel (SST)
Cable Specification	75 Ohm coaxial, fluoroethylene propylene (FEP) insulated
Connector Type	Miniature coaxial ClickLoc connector
Agency Approvals	Multiple approvals (Option 05)

Mechanical Monitoring & TSI Performance

The 330905-00-25-05-02-05 transducer operates via high-frequency eddy-current probe scaling to measure real-time rotor dynamics in narrow keyways, small-diameter shafts, or restricted counterbores. Output voltage varies linearly with the physical gap between the PPS tip and the target material. Performing gap voltage validation to achieve a target reading of -10 VDC during installation ensures the probe is centered within its linear operating span, optimizing cross-talk suppression when deployed alongside adjacent sensor channels.

Frequently Asked Questions

Q: What gap voltage level verifies correct mechanical calibration during probe setup?

A: Mechanical insertion depth must be adjusted until the output voltage measured at the connected 3300 NSv Proximitor Sensor reads -10 VDC, centering the signal in its linear voltage range.

Q: Can the 0.5 m probe cable be routed directly to system monitoring terminals?

A: No. The integrated 0.5 m (20 in) FEP coaxial cable must couple via its ClickLoc connector to a matching 3300 NSv extension cable to complete the 5.0 m or 7.0 m tuned system loop length.

Q: What structural advantages does the Polyphenylene sulfide (PPS) tip provide?

A: The PPS tip encapsulates the probe sensing coil, offering physical resistance to industrial fluids and temperature stability from -34 deg C to +177 deg C.

Field Installation Guidelines

Thread the M10 x 1 stainless steel body into the mounting hole by hand to prevent cross-threading prior to applying final torque.
Engage a minimum of 5 full threads to maintain a secure mechanical hold against machinery vibration.
Route the unarmored FEP coaxial cable inside protective conduit, maintaining minimum bend radii and separation from AC power lines.
Clean the ClickLoc miniature coaxial connector surfaces to eliminate dust and oil before locking the bayonet coupling mechanism.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.