F3YC08-0C YOKOGAWA FA-M3 Datasheet & Technical Manual

Disponibilidad: 10 Quedan en stock

YOKOGAWA F3YC08-0C Digital Output Module Configured for discrete signal switching in FA-M3 PLC platforms, the YOKOGAWA F3YC08-0C (F3YC080C Digital Output...

Código: F3YC08-0C

Manufacturer: Yokogawa
Product No.: F3YC08-0C
Product Type: Digital Output Modules
Product Origin: Japan
Payment:T/T, Western Union
Weight: 450g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

YOKOGAWA F3YC08-0C Digital Output Module

Configured for discrete signal switching in FA-M3 PLC platforms, the YOKOGAWA F3YC08-0C (F3YC080C Digital Output Module) provides direct physical/electrical execution of 8-point relay control sequences.

Suffix Breakdown & Model Matrix

F3YC08: Base model identifier for 8-channel relay output functionality.
-0C: Configuration code indicating specific relay contact type and interface standards for the FA-M3 rack system.

Hardware Specifications

Parameter	Specification
Model	F3YC08-0C
Brand	YOKOGAWA
Origin	Japan
Weight	0.45 kg
Dimensions	120 × 90 × 40 mm
Operating Temp	-10 deg C to +55 deg C
Power Consumption	5 V DC, 300 mA
Output Channels	8 (Form A Relay)
Rated Load	24 V DC / 120 V AC
Max Load Current	2 A (Resistive)
Response Time	<= 10 ms

PLC Control & Deterministic Network Attributes

The F3YC08-0C is engineered to execute high-speed switching across FA-M3 backplane architectures. To maintain system stability, the module supports deterministic command processing, ensuring that relay state transitions remain within the defined latency constraints of the PLC backplane bus. The module incorporates firmware-level monitoring for communication integrity, preventing indeterminate states during backplane bus faults. In environments requiring multi-node coordination, the module's I/O density scaling allows for efficient expansion of discrete control points without exceeding the backplane power budget or communication bandwidth.

Frequently Asked Questions

Q: Does this module support hot-swapping?

A: No. The F3YC08-0C requires the PLC base unit power to be disconnected before module extraction or insertion to prevent damage to the backplane communication pins or relay contact terminals.

Q: How should inductive loads be managed with this relay module?

A: While the module includes built-in surge suppression, external flyback diodes (for DC loads) or RC snubbers (for AC loads) are recommended to extend the mechanical contact life of the internal relays.

Q: What is the maximum switching frequency?

A: The physical response time is <= 10 ms. Exceeding recommended switching cycles will cause premature relay contact degradation; users should avoid rapid cycling for duty-intensive applications.

Field Installation Guidelines

Mounting: Secure the module to the FA-M3 base unit. Ensure the mounting screws are tightened to provide proper electrical continuity for the chassis ground.
Wiring: Maintain a clear separation between the relay output load wiring (high voltage/current) and the low-voltage communication cabling to prevent inductive coupling.
Grounding: Ensure the FA-M3 base unit is connected to a low-impedance ground point. Use shielded cables for long-distance runs to minimize noise pick-up on output lines.
Thermal Management: Ensure at least 50 mm of clearance above and below the module to facilitate convective cooling, especially when multiple modules are operating at maximum load current.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.