The General Electric IC660BBD022 is a high-performance Genius I/O block module designed for reliable industrial automation and distributed control applications. This module features 16 source I/O circuits, providing robust interface capabilities for 24/48 VDC signaling environments. It is engineered to support efficient data exchange within the Genius I/O network architecture.
Features
- 16-circuit source I/O configuration with a single common group.
- Integrated diagnostics for both inputs (Open wire, Overtemperature, Failed Switch) and outputs (Short Circuit, Overload, No Load, Failed Switch, Overtemperature).
- Configurable input filter times ranging from 5 to 100 ms.
- High-visibility LED status indicators for Unit OK and I/O Enabled states.
- Robust electrical isolation rated at 1500V for one minute between blocks.
Applications
This module is widely utilized in distributed control systems where remote I/O processing is required. It is suitable for process control, manufacturing automation, and machine monitoring systems that rely on the Genius protocol for communication.
Technical Specifications
| Model Number | IC660BBD022 |
| Operating Voltage | 18-30 VDC |
| Load Current | 2 Amperes per circuit |
| Max Inrush Current | 10 Amperes (up to 10 ms) |
| Input Response Time | 1.7 ms + configurable filter |
| Output Turn-on Delay | 1 ms |
| Heat Dissipation | 68.8 Watts (at 2A) |
| Operating Temperature | 0 to 60 degC |
| Storage Temperature | -40 to 100 degC |
| Humidity | 5-95% non-condensing |
Installation Guidelines
- Ensure the module is mounted in an environment that meets the specified operating temperature range of 0 to 60 degC.
- Verify that the power supply is disconnected before performing any wiring or module installation to prevent electrical damage.
- Maintain proper clearance for cooling, as the module dissipates up to 68.8 Watts under full load conditions.
- Use shielded cabling for I/O signals to minimize interference in high-EMI industrial environments.
- Always adhere to ESD safety protocols when handling the module to protect internal circuitry.
FAQ
What is the primary communication protocol for this module?
The IC660BBD022 utilizes the standard Genius Protocol for communication within the GE Genius I/O network.
Does this module support diagnostic feedback?
Yes, it provides comprehensive diagnostics for both input and output circuits, including detection for open wires, short circuits, overloads, and overtemperature conditions.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
GE Fanuc IS200EXHSG3A Exciter High-Speed Relay Driver Board
$99.00
$199.00
General Electric IC670ALG310 Analog Output Module
$99.00
$199.00
General Electric 531X139APMARM7 Controller Application Board
$99.00
$199.00
GE Fanuc DS200SBCBG1A Mark V Brake Control Card
$99.00
$199.00
GE Fanuc IS200EPDMG1B Exciter Power Distribution Board
$99.00
$199.00
GE Fanuc DS200CDBAG1A Contactor Driver Board
$99.00
$199.00
GE Fanuc DS200PCTMG1A Power CT Monitor Drive Board
$99.00
$199.00
General Electric IS200EDEXG1A Exciter De-Excitation Board
$99.00
$199.00
GE Fanuc IC693MDL740F Series 90-30 16-Point DC Output Module
$99.00
$199.00
General Electric IC609SJR100 I/O Link Master Module
$99.00
$199.00
GE Fanuc IC752SPL014 EX2100 Operator Interface Terminal
$99.00
$199.00
GE Mark VI IS200VTURH1BAC Primary Turbine Protection Board
$99.00
$199.00
GE Fanuc 531X309SPCAJG1 Digital Signal Processor Card
$99.00
$199.00
General Electric IC693DSM302 Motion Mate Control Module
$99.00
$199.00
GE Fanuc 531X306LCCBFM1 Drive Control Board and Display Card
$99.00
$199.00
GE Fanuc 531X111PSHARG1 Mark V Power Supply Card
$99.00
$199.00
General Electric IC600YB842 Series Six Analog Input Module
$99.00
$199.00
GE Fanuc 531X307LTBAKG1 LAN Terminal Board
$99.00
$199.00
GE Fanuc IC200MDD843 Versamax Discrete Mixed I/O Module
$99.00
$199.00
General Electric DS200TCQAG1BGE RST Analog Termination Board
$99.00
$199.00
GE Fanuc DS200RTBAG3AEB Relay Terminal Module
$99.00
$199.00
GE Fanuc DS3800NMEC1K1K Mark IV Motor Exciter Control Board
$99.00
$199.00
IS200WNPSH1ABA Mark VI Power Supply Daughter Card | GE Fanuc
$99.00
$199.00
IS200TBAIH1CDD GE Mark VI Analog Input Terminal Board
$99.00
$199.00
GE IS200TBAIH1CDC Mark VI Analog Input Terminal Board
$99.00
$199.00
GE IS200BPAIH1ACB Mark VI Analog I/O Processor Board
$99.00
$199.00
IS200EGDMH1AGG EX2100 Ground Detection Module | GE
$99.00
$199.00
GE IS200EGDMH1AEF EX2100 Exciter Ground Detector Module
$99.00
$199.00
IS200EGDMH1ADE GE Exciter Bridge and Protection Module
$99.00
$199.00
IS200VTURH1BAB | GE | Mark VI Turbine Protection Module
$99.00
$199.00
GE IS200VTCCH1CBB Mark VI Thermocouple Input Board
$99.00
$199.00
GE Mark VI VME RTD Input Card | IS200VRTDH1DAB
$99.00
$199.00
GE IS200VCMIH1BCD Mark VI VME Bus Master Control Board
$99.00
$199.00
IS200VAICH1CBA GE Analog I/O VME Card
$99.00
$199.00
GE IS220PDIAH1A Mark VIe Discrete Contact Input Module
$99.00
$199.00
Guide
Translation missing: en.general.search.loading