P0914TR Foxboro 16-Channel Analog Output Module

16-Channel Analog Output Module | Foxboro P0914TR FBM217 I/A Series

16-Channel Analog Output Module | Foxboro P0914TR FBM217 I/A Series

Availability: 10 left in stock

Foxboro P0914TR FBM217 Analog Output Module The Foxboro P0914TR, also cataloged as the FBM217 Analog Output Module, operates as a...

SKU: FBM217 P0914TR

Manufacturer: Foxboro
Product No.: FBM217 P0914TR
Product Type: Analog Output Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 300g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Foxboro P0914TR FBM217 Analog Output Module

The Foxboro P0914TR, also cataloged as the FBM217 Analog Output Module, operates as a dedicated hardware component for driving field actuators and control valves within Foxboro I/A Series platforms.

Hardware Specifications

Parameter	Specification
Model	FBM217 (P0914TR)
Brand	Foxboro
Origin	USA
Weight	0.3 kg (Net) / 2.0 kg (Shipping)
Dimensions	45 x 115 x 115 mm
Operating Temp	-40 to +70 deg C
Power Consumption	Passive bus backplane load (24 VDC redundant field supply support)
Output Channels	16 isolated analog output channels
Output Range	4-20 mA DC
Accuracy	+/-0.1% of span (Typical)
Resolution	12-bit Digital-to-Analog (D/A) conversion
Isolation	Channel-to-channel and channel-to-system isolation
Enclosure Protection	IP65 with G3 conformal coating

4-20 mA HART Loop Protocol & Channel-to-Channel Isolation

The module provides galvanic isolation across all 16 analog output channels to block ground loop propagation and prevent field noise from coupling across adjacent loops. The 12-bit D/A conversion architecture drives 4-20 mA DC current signals directly to field actuators, maintaining process variable tracking. By isolating individual channels electrically from the internal system bus, a field-side fault on one actuator loop remains isolated locally, leaving the remaining 15 outputs operational and protecting the primary field control processor.

Frequently Asked Questions

Q: Does the FBM217 support live hot-swapping during active cabinet power conditions?

A: Technicians can hot-swap the module from the baseplate under live power; however, the active 4-20 mA field signals on that specific module drop to their configured safety state during replacement unless operated in a redundant pair.

Q: How do the outputs behave upon a loss of communication with the Field Control Processor?

A: The module executes integrated fail-safe logic, automatically transitioning its 4-20 mA output currents to user-configured safety states, such as hold last value or fall to a preset minimum/maximum output value.

Q: What level of onboard diagnostics does the P0914TR perform?

A: Onboard circuitry continuously conducts automated self-tests and monitors field loop wiring for open-circuit fault conditions, reporting hardware status via front panel LED indicators and DCS system alarms.

Field Installation Guidelines

Align the module with the guide rails on the I/A Series baseplate, pressing firmly until the connector seats fully and the mechanical retaining latches engage. Confirm that cabinet ambient temperatures remain within the rated -40 to +70 deg C limits and that moisture levels do not breach the IP65 enclosure boundary.

Route all 4-20 mA output wiring through dedicated cable channels, keeping signal loops separate from high-voltage AC supply cables to prevent electromagnetic noise coupling. Terminate output conductors to the designated field termination assembly, securing screw terminals to avoid high-resistance contact points. Connect the overall cable shielding to a single cabinet safety earth point to preserve analog signal integrity across all 16 field channels.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.