7400213-100 Triconex Modular Base Datasheet & Technical Manual

7400213-100 Triconex TMR Termination Assembly Modules

7400213-100 Triconex TMR Termination Assembly Modules

Availability: 20 left in stock

Triconex 7400213-100 Termination Assembly Module The Triconex 7400213-100, also cataloged as the 7400213-100 Termination Assembly Module, operates as a dedicated...

SKU: 7400213-100

Manufacturer: ICS Triplex
Product No.: 7400213-100
Product Type: Termination Assembly Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 500g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Triconex 7400213-100 Termination Assembly Module

The Triconex 7400213-100, also cataloged as the 7400213-100 Termination Assembly Module, operates as a dedicated hardware component for field wiring interface execution within Triconex safety instrumented system networks.

Hardware Specifications

Parameter	Specification
Model	7400213-100
Brand	Triconex
Origin	United States
Weight	0.5 kg
Dimensions	20.3 cm x 12.7 cm x 5.1 cm
Operating Temp	0 to 60 deg C
Storage Temp	-40 to +85 deg C
Relative Humidity	5 to 95%, non-condensing
Power Consumption	Determined by paired I/O module configuration
Voltage Rating	24 VDC nominal (18 to 32 VDC range)
Current Capacity	Up to 2 A per channel
Channel Routing	Supports analog and digital I/O distributions
Isolation Type	Galvanic isolation between field wiring and backplane
Safety Certification	IEC 61508 SIL 3 compliant

Triple Modular Redundant Safety Architecture

The hardware incorporates high-integrity galvanic isolation pathways to secure continuous data exchange between field sensors, actuators, and internal backplane networks. By splitting incoming and outgoing terminal signals into distinct parallel channels, the module sustains the Triple Modular Redundant (TMR) 2oo3 architecture mandated by IEC 61508 SIL 3 safety standards. Integrated mechanical keying rails physically prevent wrong module cross-insertion, ensuring proper signal line termination. The passive electrical design mitigates internal common-mode noise and prevents external voltage spikes from compromising core processing logic during safety instrumented functions.

Frequently Asked Questions

Q: Does online hot-swapping of the attached I/O modules disrupt the field wiring on this base?

A: No. The termination assembly retains all physical field conductors on the screw-clamp or spring-clamp blocks, allowing users to extract and replace active I/O modules from the slot rails without causing signal drops or requiring field wire disconnection.

Q: What are the input voltage parameters allowed on the terminal block interfaces?

A: The board operates under a nominal 24 VDC threshold, tolerating a continuous direct current range between 18 VDC and 32 VDC without damaging internal galvanic isolation components.

Q: How many active channels can this mechanical base assembly structure route simultaneously?

A: The capacity matches the specific paired Triconex I/O module, typically routing up to 32 or 64 channels with an independent path current threshold not exceeding 2 A per channel.

Field Installation Guidelines

Chassis Panel Attachment: Mount the assembly base directly onto the designated cabinet sub-panel using specified mounting hardware. Torque all retention fasteners to standard industrial specifications to ensure a rigid mechanical foundation.
Low-Impedance Earth Grounding: Secure a low-impedance copper grounding strap from the base frame grounding lug to the main plant instrumentation earth ground bar to establish an effective static dissipation path.
Conductor Termination Method: Strip field wiring jackets according to terminal block depth requirements. Seat the bare copper conductors fully into the screw-clamp or spring-clamp receptors, verifying that no loose strands span adjacent terminal terminals.
Signal Ducts Separation: Route analog signal loops and low-voltage digital control wires through independent, grounded wiring ducts completely segregated from high-power electrical distribution lines to minimize electromagnetic induction.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.