FC-PDB-0824 Honeywell Power Distribution Board

8-Channel Power Distribution Board | Honeywell FC-PDB-0824

8-Channel Power Distribution Board | Honeywell FC-PDB-0824

Availability: 20 left in stock

Honeywell FC-PDB-0824 Experion PKS Power Distribution Board Configured for multi-channel DC voltage branch isolation in Experion PKS and C300 architectures,...

SKU: FC-PDB-0824

Manufacturer: Honeywell
Product No.: FC-PDB-0824
Product Type: Power Distribution Boards
Product Origin: USA
Payment:T/T, Western Union
Weight: 200g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Honeywell FC-PDB-0824 Experion PKS Power Distribution Board

Configured for multi-channel DC voltage branch isolation in Experion PKS and C300 architectures, the Honeywell FC-PDB-0824 (FC-PDB-0824 8-Channel Power Distribution Board) provides direct physical/electrical execution. The assembly splits a main 24 VDC supply rail into eight independently fused branch outputs to power field transmitters, switches, and remote I/O devices. Each channel incorporates individual fuse protection to isolate short-circuit conditions to a single loop, maintaining continuous power distribution across adjacent operating channels.

Hardware Specifications

Parameter	Specification
Model	FC-PDB-0824
Brand	Honeywell
Origin	USA
Weight	200g
Dimensions	94 mm x 109 mm x 71 mm
Operating Temp	0 deg C to +60 deg C (32 deg F to 140 deg F)
Power Consumption	Passive distribution board (Losses determined by fuse resistance)
Input Voltage Range	18 VDC to 30 VDC (24 VDC nominal)
Output Channels	8 independently fused outputs
Protection Rating	Max 2 AT (Slow-acting, 5 x 20 mm) per channel
Input Connector	2-pole header (Weidmuller BVZ 7.62/02F SW)
Field Connector	2-pole socket block (Weidmuller BL 5.08/2 SN OR)
Mounting Format	DIN EN Rails TS32 / TS35 x 7.5 (95 mm rail length)
Certifications	CE (UL, TUV, CSA Pending)

Channel-to-Channel Isolation and HART Loop Bus Connectivity

The board layout provides clean DC voltage routing to field loops, preventing ground loop formation and common-mode voltage propagation across adjacent channels. By maintaining stable DC bus lines and low signal attenuation, the board supports overlay digital communications on field wiring, ensuring full compatibility with 4-20 mA HART loop protocol instruments and associated Experion PKS DCS carrier interfaces.

Frequently Asked Questions

Q: What specific fuse type and physical size does the FC-PDB-0824 accept?

A: The board accepts 5 x 20 mm slow-acting fuses rated up to a maximum of 2 AT per individual output channel.

Q: Can the input connector accept reversed polarity power connections?

A: The input Weidmuller BVZ header features mechanical keying (KO BV/SV7.62) to physically prevent misaligned insertion or reverse-polarity wiring.

Q: Does replacing a blown channel fuse require powering down the entire input supply bus?

A: No. Because each output circuit operates through an independent fuse holder, technicians can pull and replace a blown fuse for a specific channel without interrupting the main 24 VDC bus powering the remaining seven channels.

Field Installation Guidelines

Snap the board onto standard TS32 or TS35 x 7.5 DIN rail sections, allowing a minimum rail length of 95 mm. Secure all input power conductors to the 2-pole Weidmuller header, verifying that the mechanical keying tabs align correctly before applying torque. Connect field loop cabling to the 2-pole output socket blocks, keeping power supply cables routed separately from sensitive analog signal cables to eliminate inductive noise coupling. Ensure cabinet airflow maintains local ambient temperatures between 0 deg C and +60 deg C.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.