8405-809 Woodward Front-Panel HMI Datasheet & Technical Manual

Availability: 99 left in stock

Woodward 8405-809 Front-Panel HMI The Woodward 8405-809, also cataloged as the 8405-809 Front-Panel HMI / Operator Interface, operates as a...

SKU: 8405-809

Manufacturer: Woodward
Product No.: 8405-809
Product Type: Touchscreen Operator Panels
Product Origin: USA
Payment:T/T, Western Union
Weight: 700g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Woodward 8405-809 Front-Panel HMI

The Woodward 8405-809, also cataloged as the 8405-809 Front-Panel HMI / Operator Interface, operates as a dedicated hardware component for graphical visualization and operational parameter modification within engine governance and turbine control system networks.

Hardware Specifications

Parameter	Specification
Model	8405-809
Brand	Woodward
Origin	United States
Weight	0.7 kg (1.5 lbs)
Dimensions	190 mm x 140 mm x 64 mm
Operating Temp	-40 to +85 deg C (Industrial Extended Range)
Power Consumption	18-32 VDC (Nominal 24 VDC)
Display Technology	5.7-inch Color TFT LCD
Interaction Method	Industrial Resistive Touchscreen (Glove-compatible)
Communication Ports	1 x Ethernet (10/100 Base-T), 1 x RS-232, 1 x RS-485
Ingress Protection	IP65 Rated front panel (when correctly panel-mounted)
Monitored Variables	Turbine Speed, Oil Pressure, Exhaust Temp, Actuator Position

Industrial Drives and Governor Systems

The human-machine interface incorporates an industrial-grade resistive touchscreen designed to deliver consistent actuator loop feedback response metrics even when operated with industrial safety gloves. The processing core handles data transmission across serial and Ethernet networks, mapping primary variables such as turbine speed, exhaust gas temperature, and oil pressure profiles into localized graphical metrics. The extended -40 to +85 deg C operating window and the IP65-rated front faceplate isolate the inner surface mount electronics from high-vibration stresses and thermal shock profiles characteristic of turbine halls.

Frequently Asked Questions

Q: What is the recommended input voltage window for the 8405-809 HMI?

A: The operator panel operates on an industrial low-voltage DC input range spanning from 18 to 32 VDC, with a nominal operating target centered at 24 VDC.

Q: How are network communications handled with the primary turbine governor controller?

A: The physical layer interface provides integrated communication routing through one 10/100 Base-T Ethernet port, alongside dedicated standalone RS-232 and RS-485 serial ports to support industrial communication protocols.

Q: Can this display module withstand direct fluid spray or dust ingress in the field?

A: When correctly integrated using the factory panel-mounting gasket system, the front faceplate satisfies IP65 ingress protection criteria, shielding the display layer from fine dust penetration and low-pressure water streams.

Field Installation Guidelines

Panel Cutout and Torque Specifications: Prepare the enclosure door layout utilizing the precise physical dimensions (190 mm x 140 mm). Tighten the rear mechanical retention clamps evenly to compress the perimeter gasket without distorting the front bezel.
Low-Impedance Frame Grounding: Secure a heavy copper bonding cable from the dedicated M4 ground terminal stud on the rear chassis directly to the master electrical enclosure frame ground bar to maintain robust shielding metrics.
Communication Routing Isolation: Route the 10/100 Base-T Ethernet and serial cables through separate low-voltage wire paths. Keep these signal conduits isolated from high-voltage motor starter lines and high-current AC cabling to mitigate electromagnetic noise coupling.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.