A2H254-16 P0973BK Foxboro I/A Series Datasheet & Technical Manual

Availability: 10 left in stock

Foxboro A2H254-16 P0973BK Termination Assembly The Foxboro A2H254-16 P0973BK, also cataloged as the A2H254-16 Termination Assembly, operates as a dedicated...

SKU: A2H254-16 P0973BK

Manufacturer: Foxboro
Product No.: A2H254-16 P0973BK
Product Type: Terminal Block Assemblies
Product Origin: USA
Payment:T/T, Western Union
Weight: 350g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Foxboro A2H254-16 P0973BK Termination Assembly

The Foxboro A2H254-16 P0973BK, also cataloged as the A2H254-16 Termination Assembly, operates as a dedicated hardware component for field device signal termination within Foxboro I/A Series platforms. Configured for physical wiring convergence, the hardware provides direct physical/electrical execution for 16-channel I/O distribution blocks, routing field instrumentation signals straight into matching modular backplane slots.

Hardware Specifications

Parameter	Specification
Model	A2H254-16 P0973BK
Brand	Foxboro
Origin	USA
Weight	0.35 kg
Dimensions	45 x 102 x 104 mm
Operating Temp	-20 to +70 deg C
Power Consumption	Passive (determined by connected FBM load)
System Compatibility	Foxboro I/A Series FBM modules
Function	Provides wiring interface between FBMs and field devices
Number of Terminals	16-channel terminal block
Signal Types Supported	Analog input/output, digital input/output
Wiring Method	Screw-clamp or spring-clamp terminals
Isolation	Channel-to-channel and channel-to-ground (via FBM design)
Humidity	Up to 95% RH (non-condensing)
Certifications	CE, UL, CSA, IEC 61131-2

Process Control & DCS Terminal Properties

The assembly incorporates separate channel tracks supporting native 4-20 mA HART loop protocol routing and high-density discrete point configurations. It utilizes independent terminal allocations per channel to complement the galvanic channel-to-channel isolation architecture built into the companion Fieldbus Modules (FBMs). The rugged physical trace layout resists high-frequency industrial electrical noise and common-mode current loops, maintaining signal verification limits across continuous analog and digital process loops without passive drift.

Frequently Asked Questions

Q: Does this hardware asset contain active power-limiting circuits or processors? A: No, this termination assembly is a passive electrical interface component. It does not contain an independent microprocessing unit or internal firmware flash blocks; all operating limits and electrical requirements are dictated by the hosting FBM architecture.

Q: How does this assembly affect hot-swappable installation routines of upstream FBM cards? A: The terminal block connects via permanent carrier cables to the module baseplate, meaning field instrumentation wiring remains undisturbed. This specific physical segregation allows operators to perform hot-swappable replacement of active FBM cards without opening any field loop switches.

Q: Can this terminal block configuration mix different signal classifications simultaneously? A: The physical terminal blocks accept both voltage and current ranges for analog or digital configurations. However, the exact deployment is strictly limited by the specific companion FBM module variety; mixed signaling across one board requires an explicit matching split-signal module mapping.

Field Installation Guidelines

Baseplate and Rail Securement: Fit the terminal track assembly tightly onto a standard symmetric DIN rail or specialized mounting frame. Verify that the chassis-ground spring clips make solid metal-to-metal contact with the zinc-plated or steel rail to guarantee transient voltage draining.
Screw Terminal Integrity: Strip all field conductor ends back exactly 8 mm before placing them inside the screw-clamp mechanisms. Tighten every terminal screw according to standard industrial torque levels to eliminate localized micro-arcing and signal attenuation.
Shield Grounding Topology: Connect all individual 4-20 mA sensor signal shield wires directly to the common instrumentation bus bar at the panel entry base. Avoid ground loops by keeping sensor fields ungrounded at the terminal junction point.
Separation Matrix: Segregate field cables inside the terminal enclosure. Separate the low-voltage analog signal cables from inductive AC power supply links or high-current mechanical motor relay paths by at least 30 cm.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.