P0400YE Foxboro Millivolt Analog Input Module

Analog Input Module | Foxboro P0400YE FBM04 I/A Series

Analog Input Module | Foxboro P0400YE FBM04 I/A Series

Availability: 10 left in stock

Foxboro P0400YE FBM04 Millivolt Analog Input Module The Foxboro P0400YE, also cataloged as the FBM04 Millivolt Analog Input Module, operates...

SKU: FBM04 P0400YE

Manufacturer: Foxboro
Product No.: FBM04 P0400YE
Product Type: Analog Input Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 450g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Foxboro P0400YE FBM04 Millivolt Analog Input Module

The Foxboro P0400YE, also cataloged as the FBM04 Millivolt Analog Input Module, operates as a dedicated hardware component for low-level millivolt signal acquisition within Foxboro I/A Series platforms.

Hardware Specifications

Parameter	Specification
Model	FBM04 (P0400YE)
Brand	Foxboro
Origin	USA
Weight	0.45 kg
Dimensions	24 x 163 x 241 mm
Operating Temp	-40 to +70 deg C
Power Consumption	Passive bus backplane load (24 VDC redundant input support)
Channel Count	16 isolated analog input channels
Input Signal Range	-100 mV to +100 mV DC
Measurement Accuracy	+/-0.1% of span (Typical)
Resolution	16-bit A/D conversion
Isolation	Channel-to-channel and channel-to-system isolation
Enclosure Protection	IP65 rating with G3 conformal coating

Cold Junction Compensation & Channel-to-Channel Isolation

The module provides galvanic channel-to-channel isolation across all 16 low-level input circuits to eliminate ground loop distortion and reject common-mode noise on delicate -100 mV to +100 mV DC signals. When paired with compatible field termination assemblies utilizing Cold Junction Reference (CJR) sensors, internal firmware algorithms execute automatic cold junction compensation (CJC) and non-linear thermocouple linearization. This processing converts low-voltage sensor outputs into high-granularity 16-bit digital values without requiring external signal conditioning hardware or intermediate transmitters.

Frequently Asked Questions

Q: Can the FBM04 (P0400YE) accept direct 4-20 mA current loop inputs?

A: The module is designed specifically for low-level millivolt signals (-100 to +100 mV DC) and cannot directly process standard 4-20 mA current loops, which require dedicated modules such as the FBM201 or FBM211.

Q: How does the module handle cold junction compensation during thermocouple processing?

A: Cold junction compensation is executed by integrating reference temperature measurements provided by the associated field termination assembly (TA) or via configured I/A Series software routines.

Q: What diagnostic mechanisms detect sensor failures in field wiring?

A: Onboard diagnostic logic continuously scans for open-circuit field wiring conditions—a common failure mode in thermocouple circuits—and illuminates front-panel status LEDs to identify faulty sensor lines instantly.

Field Installation Guidelines

Align the module with the guide channels on the standard Foxboro I/A Series baseplate and push firmly until the rear edge connectors lock into the backplane bus and retention latches engage. Verify that cabinet ambient conditions remain strictly within the -40 to +70 deg C temperature range and that the housing satisfies IP65 ingress protection standards.

Route low-level millivolt wiring in shielded twisted-pair cables, keeping them strictly separated from high-voltage AC power lines and inductive switching paths to avoid electromagnetic noise induction. Terminate signal conductors at the matching termination assembly and secure screw terminals to standard tightness. Ground overall cable shielding at a single point on the main cabinet ground bus bar to preserve 16-bit signal conversion accuracy across all 16 input channels.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.