Foxboro P0901XT-02 Intelligent Transmitter Module
The Foxboro P0901XT-02, also cataloged as the P0901XT Intelligent Transmitter Module, operates as a dedicated hardware component for multi-variable process loop measurement within Foxboro Evo and I/A Series DCS platforms. It converts dynamic process inputs for pressure, differential pressure, flow, and liquid level directly into a calibrated 4-20 mA analog output with digital signal overlays.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | P0901XT-02 |
| Brand | Foxboro |
| Origin | USA |
| Weight | 0.18 kg |
| Dimensions | Standard Foxboro compact transmitter assembly enclosure |
| Operating Temp | -40 to 85 deg C |
| Power Consumption | Loop-powered via nominal 24 VDC bus |
| Reference Accuracy | +/-0.15% of calibrated range |
| Output Signal | 4-20 mA analog with HART / FOUNDATION Fieldbus / PROFIBUS PA protocol overlay |
| Ingress Protection | IP66 rating |
| Wetted Components | Stainless steel / Hastelloy corrosion-resistant alloys |
4-20 mA HART Loop Protocol & Channel Isolation
The P0901XT-02 transmits process parameters via 4-20 mA HART loop protocol telemetry, overlaying bi-directional digital command streams onto the analog current loop without interrupting continuous signal feedback. Internal galvanic isolation barriers decouple the sensing element circuitry from the field wiring loops, suppressing ground loop interference and cross-talk across multi-channel baseplates. Integrated cold junction compensation (CJC) processing and real-time internal self-diagnostics constantly monitor transducer integrity, ensuring high signal fidelity across FOUNDATION Fieldbus and PROFIBUS PA network segments.
Frequently Asked Questions
Q: Can the P0901XT-02 module be hot-swapped while the field loop is energized?
A: Field loop power must be disconnected prior to wiring or module removal to prevent electrical arcing and field bus signal disruption during maintenance.
Q: How does the unit maintain reference accuracy across wide thermal variations?
A: Internal digital microprocessors apply thermal compensation profiles against raw piezoresistive or capacitive sensor data to sustain +/-0.15% accuracy from -40 to 85 deg C.
Field Installation Guidelines
Mount the P0901XT-02 securely using a 2-inch pipe, wall, or panel mounting bracket. Route field wiring through dedicated conduit entries using approved cable glands to maintain the IP66 ingress protection seal. Terminate twisted-shielded pair cables at the internal screw terminals, ensuring the cable drain wire bonds directly to the single-point cabinet safety ground bar. Verify correct 24 VDC polarity and line loop resistance limits before closing the enclosure cover and applying power to the loop.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
P0400YE-0J Foxboro I/A Series DCS Control Modules
$99.00
$199.00
Foxboro P0926GJ I/A Series DCS Cable Termination Assemblies
$99.00
$199.00
Foxboro P0916KH P0916KH-0B I/A Series Termination Assemblies
$99.00
$199.00
Foxboro ZCP270 P0926CP I/A Series Control Processor Module
$99.00
$199.00
Foxboro FOUNDATION Fieldbus Communication Module
$99.00
$199.00
Foxboro A2H124-24FX P0973BJ I/A Series Analog Input Modules
$99.00
$199.00
43AP-FA42C-PC Foxboro Pneumatic Indicating Controller
$99.00
$199.00
FDC280 RH101FQ Foxboro Field Device Controller 280
$99.00
$199.00
Foxboro FBM219 P0917LH0C I/A Series Discrete I/O Module
$99.00
$199.00
IGP10-A22E1F-M2T Foxboro I/A Series Pressure Transmitter
$99.00
$199.00
Foxboro P0927AQ I/A Series 110/240 VAC FPS Power Cable
$99.00
$199.00
Foxboro P0917TQ FBM215 I/A Series HART Output Module
$99.00
$199.00
8-Channel Analog Input Module | Foxboro P0914SQ FBM201
$99.00
$199.00
Foxboro P0914SY FBM204 I/A Series Isolated Analog I/O Module
$99.00
$199.00
ZCP270 P0926CP Foxboro I/A Series Z-Module Control Processor
$99.00
$199.00
Foxboro CP60 P0961FR I/A Series Control Processor Module
$99.00
$199.00
Foxboro P0904BS I/A Series GCIO Graphics Controller Module
$99.00
$199.00
IPM-P0904HA Foxboro I/A Series 39 VDC Power Supply Module
$99.00
$199.00
Foxboro P0926PA I/A Series Termination Assembly Module
$99.00
$199.00
P0926HM Foxboro I/A Series Field Termination Assemblies
$99.00
$199.00
AD206HQ Foxboro I/A Series Termination Assembly Modules
$99.00
$199.00
P0916NB Foxboro I/A Series Isolated Output Modules
$99.00
$199.00
P0700HU Foxboro I/A Series Cable Termination Assemblies
$99.00
$199.00
Foxboro P0918HU I/A Series Industrial Power Modules
$99.00
$199.00
P0931RU Foxboro I/A Series Type 4 Termination Cables
$99.00
$199.00
873EC-BIPFGZ Foxboro 873EC Series Conductivity Analyzers
$99.00
$199.00
ANR10D-423 S1 Yokogawa CENTUM CS/VP Node Interface Units
$99.00
$199.00
SAI143-S53/A4S10 Yokogawa CENTUM CS/VP Analog Input Modules
$99.00
$199.00
YOKOGAWA ALR121-S00 S1 Serial Modbus Communication Module
$99.00
$199.00
AIP532-S1 YOKOGAWA CENTUM VP ESB Bus Coupler Module
$99.00
$199.00
YOKOGAWA ADR541-P00 S2 CENTUM VP Analog Output Module
$99.00
$199.00
ALF111-S00 S1 YOKOGAWA Fieldbus Communication Module
$99.00
$199.00
YOKOGAWA NFAI143-S50 S1 CENTUM VP Analog Input Module
$99.00
$199.00
NFCP502-W05 Yokogawa STARDOM FCN CPU Module
$99.00
$199.00
Guide
Translation missing: en.general.search.loading