P0926PA Foxboro Termination Assembly Module

Foxboro P0926PA I/A Series Termination Assembly Module

Foxboro P0926PA I/A Series Termination Assembly Module

Availability: 10 left in stock

Foxboro P0926PA Termination Assembly Module The Foxboro P0926PA, also cataloged as the P0926PA Termination Assembly Module, operates as a dedicated...

SKU: P0926PA

Manufacturer: Foxboro
Product No.: P0926PA
Product Type: Termination Assembly Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 500g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Foxboro P0926PA Termination Assembly Module

The Foxboro P0926PA, also cataloged as the P0926PA Termination Assembly Module, operates as a dedicated hardware component for electrical termination of analog, digital, and pulse signals within Foxboro I/A Series FBM I/O platforms. This hardware interface routes field-side signal paths directly to host field bus modules via channel-isolated terminal points, preventing field-generated noise from degrading control loop integrity across continuous processing environments.

Hardware Specifications

Parameter	Specification
Model	P0926PA
Brand	Foxboro
Origin	USA
Weight	0.5 to 1.0 kg
Dimensions	Standard Foxboro FBM TA Envelope
Operating Temp	-20 to +70 deg C
Power Consumption	Passive Field Termination / Low Power
System Compatibility	Foxboro I/A Series FBM I/O Modules
Termination Type	Screw or Spring Clamp Terminals
Signal Support	Analog, Digital, and Pulse I/O
Humidity Range	5% to 95% RH, non-condensing
Protection Level	Conformal Coated PCB
Material	High-strength Industrial Composite
Mounting	DIN Rail or Cabinet Enclosure Installation
Certifications	CE, UL, CSA Compliance

Channel Isolation and Signal Integrity

The Foxboro P0926PA incorporates channel-to-channel isolation architecture to decouple field-side loops from backplane processing networks in dense DCS applications. By eliminating potential ground loops across discrete and analog signal paths, the module limits potential interference caused by field voltage spikes. Integrated conformal coating on the internal printed circuit board provides galvanic protection against conductive atmospheric contaminants, maintaining rated dielectric strength across continuous operational cycles.

Frequently Asked Questions

Q: What wire gauge range is supported by the terminal connectors on the P0926PA module?

A: The screw and spring-clamp connection blocks accommodate standard field wiring from 0.2 to 2.5 mm2 (24 to 12 AWG) solid or stranded copper conductors.

Q: How does the conformal coating protect the module during continuous exposure to harsh industrial environments?

A: The applied conformal layer forms a non-conductive barrier over circuit traces, isolating internal components from moisture, airborne corrosives, and condensed atmospheric humidity within rated ranges.

Field Installation Guidelines

Mounting Structure: Align the assembly base with a standard 35 mm DIN rail inside an IP54-rated enclosure. Slide the unit until the rear lock clip engages fully onto the rail channel.
Wiring Practices: Strip conductor insulation to 7 mm before insertion into screw or spring-clamp terminals. Tighten terminal screws to a maximum torque of 0.5 Nm (4.4 in-lb) to prevent terminal block fracture.
Shield Shielding & Grounding: Terminate all individual cable shields directly at the cabinet single-point ground bus bar. Do not ground field shields inside the termination assembly housing to prevent circulating ground loop currents.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.