The GE Fanuc IC693PWR330, also cataloged as the IC693PWR330 High-capacity power supply, operates as a dedicated hardware component for baseline voltage regulation and distribution within Series 90-30 PLC platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC693PWR330 |
| Brand | GE Fanuc Emerson |
| Origin | United States |
| Weight | 0.57 kg (1.25 lbs) |
| Dimensions | Standard unnumbered leftmost rack slot width |
| Operating Temp | Industry standard 0 to 60 deg C (ambient) |
| Power Consumption | Input: 90 VA (AC input) / 50 W (DC input); Max Output: 30 W |
| Nominal Rated Voltage | 120/240 VAC or 125 VDC |
| Input Voltage Range, AC | 85 to 264 VAC |
| Input Voltage Range, DC | 100 to 300 VDC |
| Inrush Current | 4 A peak, 250 ms maximum |
| Output Ratings |
5 VDC: up to 30 W 24 VDC Relay: up to 15 W Isolated 24 VDC: up to 20 W |
| Total Output Capacity | 30 W maximum total combined load |
| Holdup Time | 20 ms minimum |
| Connection Terminals | 6 screw terminals |
| Embedded Interface | RS-485 serial communication port |
| Status Indicators | PWR, OK, RUN, BATT LED indicators |
| Compliance | CE, UL |
Backplane Bus Communication Velocity and I/O Density Scaling
The module delivers optimized current to the rack backplane, preventing power sag conditions that degrade backplane bus communication velocity during intensive transactions. By permitting the allocation of the full 30 W capacity entirely to the 5 VDC rail, it maintains operational margins necessary for high-density setups during linear I/O density scaling. The embedded RS-485 communication port provides dedicated pathways to Hand-Held programmers or workstations, bypassing the primary CPU port without introducing configuration conflict or firmware flash compatibility mismatches.
Frequently Asked Questions
Q: What are the restrictions regarding the installation position of this power supply?
A: The IC693PWR330 must be populated exclusively into the unnumbered, leftmost slot of a Series 90-30 rack chassis. It cannot be inserted into standard numbered I/O slots.
Q: Can all three outputs draw their maximum rated wattages simultaneously?
A: No. While individual circuits tolerate up to 30 W (5 VDC), 20 W (Isolated 24 VDC), and 15 W (24 VDC Relay), the cumulative combined load across all three power lines must not exceed the total hard limit of 30 W.
Field Installation Guidelines
- Isolate and disconnect all external primary supply lines before wiring the input terminals to avoid flashover risks.
- Route standard 120/240 VAC or 125 VDC inputs to the designated terminal strip, ensuring strict adherence to the 6-terminal block schematic.
- Verify that the protective overvoltage and overcurrent limits match local loop regulations before executing power-up routines.
- Ground the main frame connection directly to the enclosure backpanel ground bus bar to maximize electromagnetic isolation and ensure the holdup time functions properly during input power drops.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
Guide
Translation missing: en.general.search.loading