8C-PAIHA1 Honeywell Analog Input Module 16-Ch HART

Honeywell 8C-PAIHA1 51454470-275 8 Analog Input Modules

Honeywell 8C-PAIHA1 51454470-275 8 Analog Input Modules

Availability: 99 left in stock

Honeywell 8C-PAIHA1 Experion PKS Series 8 Analog Input Module Configured for 4-20 mA DC signal processing and digital transmitter diagnostic...

SKU: 8C-PAIHA1 51454470-275

Manufacturer: Honeywell
Product No.: 8C-PAIHA1 51454470-275
Product Type: Analog Input Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 800g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Honeywell 8C-PAIHA1 Experion PKS Series 8 Analog Input Module

Configured for 4-20 mA DC signal processing and digital transmitter diagnostic data transfer in Experion PKS C300 controller systems, the Honeywell 8C-PAIHA1 (8C-PAIHA1 Analog Input Module) provides direct physical/electrical execution.

Suffix Breakdown & Model Matrix

Code Suffix	Feature Description	Electrical / Physical Specification
8C	Platform Designation	Experion PKS Series 8 hardware form factor
PAI	Module Function	High-density Analog Input module
H	Communication Feature	Integrated HART protocol pass-through support
A1	Revision / Channel Density	16-channel hardware configuration (Part Number: 51454470-275)

Hardware Specifications

Parameter	Specification
Model	8C-PAIHA1 (Part Number: 51454470-275)
Brand	Honeywell
Origin	USA
Weight	0.8 kg
Dimensions	12.7 x 12.7 x 12.7 cm
Operating Temp	0 to +60 deg C
Power Consumption	Standard Series 8 backplane power bus load
System Platform	Experion PKS Series 8
Input Capacity	16 channels
Signal Range	4-20 mA DC
Protocol Compatibility	HART 5, HART 6, HART 7
ADC Resolution	16-bit analog-to-digital converter
Galvanic Isolation	1500 VDC field-to-logic isolation
Mounting	Plugs into Series 8 I/O Termination Assembly (IOTA)

4-20 mA HART Loop Protocol & Channel Isolation Execution

This module features 16-bit analog-to-digital conversion integrated with transparent HART protocol pass-through across all 16 isolated channels. The internal signal conditioning circuit modulates digital frequency-shift keying (FSK) HART signals directly over the primary 4-20 mA DC loop without degrading the primary process variable acquisition. Built-in 1500 VDC galvanic isolation between field-side wiring and internal logic circuits suppresses common-mode voltage spikes, preventing cross-channel electrical interference from corrupting C300 controller memory registers.

Frequently Asked Questions

Q: Does removing or inserting the module disrupt field wiring on the Series 8 platform?

A: Field wiring connects directly to the underlying Input Output Termination Assembly (IOTA), allowing the electronic module to be installed or replaced without disconnecting field wiring terminals.

Q: How does the module handle HART pass-through data to upper-level asset management systems?

A: The module separates digital FSK HART signals from the primary 4-20 mA current loop on each channel and passes secondary variables and diagnostic status data directly to the C300 controller and Experion Asset Management software.

Q: Can this module be deployed in high-availability redundant configurations?

A: High-availability redundancy requires installing a matching pair of 8C-PAIHA1 modules onto a redundant Series 8 IOTA block, which manages primary and secondary hardware failover automatically.

Field Installation Guidelines

Align the card pins precisely with the designated slot connectors on the Series 8 IOTA board and apply uniform downward pressure until the locking tabs snap firmly into place. Ensure field wiring shielding grounds at one single point on the IOTA shield bar to prevent ground loop currents from injecting noise into the 16-bit ADC circuits. Maintain separated cable ducting for incoming 4-20 mA instrument field cables away from high-voltage AC power distribution lines to maintain 1500 VDC galvanic isolation integrity.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.