NFTP5S-00 Yokogawa CENTUM VP FIO Series Datasheet & Technical Manual

Availability: 99 left in stock

Yokogawa NFTP5S-00 CENTUM VP Series Field I/O Terminal Block Configured for executing physical signal routing between field instruments and digital...

SKU: NFTP5S-00

Manufacturer: Yokogawa
Product No.: NFTP5S-00
Product Type: Field I/O Terminal Blocks
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 250g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Yokogawa NFTP5S-00 CENTUM VP Series Field I/O Terminal Block

Configured for executing physical signal routing between field instruments and digital I/O processing cards within CENTUM VP and ProSafe-RS control nodes, the Yokogawa NFTP5S-00 (NFTP5S-00 Field I/O Terminal Block) provides direct physical/electrical execution.

Hardware Specifications

Parameter	Specification
Model	NFTP5S-00
Brand	Yokogawa
Origin	Japan
Weight	0.25 kg (0.55 lbs)
Dimensions	114 mm x 32.6 mm x 60.5 mm
Operating Temp	-20 to +70 deg C (Extended operational window)
Power Consumption	Passive physical connection bus (Zero internal active power draw)
Number of Points	32 Channels
Terminal Type	Heavy-duty screw or clamp interface terminal arrays
Rated Voltage	250 V AC/DC
Rated Current	10 A continuous boundary limit
Insulation Resistance	100 M Ohm minimum verified at 500 V DC
Dielectric Strength	2000 V AC sustained for 1 minute
Storage Temperature	-20 to +70 deg C
Housing Material	Flame-retardant industrial-grade thermoplastic
Humidity Boundaries	5 to 90% RH, non-condensing

Process Control & DCS Instrumentation Properties

The terminal hardware manages multi-channel field wire concentration loops by providing 32 discrete connection channels linked directly to central ESB/ER bus node components. To maintain linear signal integrity across standard 4-20 mA HART loop protocol lines, the mechanical design integrates advanced physical isolation layers across the terminal blocks. Built-in terminal separations resist up to 2000 V AC of dielectric stress for 1 minute, effectively shielding local logic boards from unexpected field-side voltage transients and stopping ground loop fluctuations from causing data degradation inside the DCS cabinet.

Frequently Asked Questions

Q: What are the consequences of deploying this terminal block configuration inside an active safety instrumented system (SIS)?

A: The passive architecture maintains direct circuit paths with no internal software processing delays. This makes it fully transparent to the ProSafe-RS control logic, allowing it to support fail-safe signal distribution while matching the strict timing parameters of the safety system.

Q: How do the mechanical screw terminals prevent loose connection faults caused by ambient plant vibrations?

A: The terminals use compression plates made of tempered alloys that exert a continuous clamping force on the wire. This mechanical clamping prevents the wires from backing out or loosening during long-term exposure to standard industrial vibration frequencies.

Q: Does this block contain active temperature tracking components or integrated reference junctions?

A: No. The NFTP5S-00 is a passive termination interface block intended for standard digital and analog routing. It contains no active microprocessors, internal reference junctions, or built-in A/D conversion components.

Field Installation Guidelines

Terminal Tightening and Wire Strip Adjustments: Strip the outer conductor shielding back to match the slot opening profile of the screw terminal clamp. Insert the wire completely into the pressure saddle and torque the screw terminal firmly to establish an optimal, low-resistance connection path.
Shield Ground Routing Restraints: Guide all field sensor and loop drain shields to a centralized, single-point master grounding plate inside the marshalling cabinet. Do not ground the shields at the field instrument side to prevent stray currents from creating ground loops across the 32 channels.
DIN Rail Retention and Lock Placement: Snug the flame-retardant thermoplastic housing onto a standard 35 mm symmetric DIN rail track. Lock mechanical end stops tightly against both sides of the module cluster to prevent side-to-side drift when the panel assembly is exposed to vibration.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.