P0902XB Foxboro 32-Channel Analog Input Module

P0902XB FBM42 Foxboro I/A Series 32-Channel Analog Input Module

P0902XB FBM42 Foxboro I/A Series 32-Channel Analog Input Module

Availability: 10 left in stock

Foxboro P0902XB FBM42 Analog Input Module Configured for high-density signal conversion in Foxboro I/A Series platforms, the Foxboro P0902XB (FBM42...

SKU: FBM42 P0902XB

Manufacturer: Foxboro
Product No.: FBM42 P0902XB
Product Type: Analog Input Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 350g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Foxboro P0902XB FBM42 Analog Input Module

Configured for high-density signal conversion in Foxboro I/A Series platforms, the Foxboro P0902XB (FBM42 Analog Input Module) provides direct physical/electrical execution.

Hardware Specifications

Parameter	Specification
Model	FBM42 (P0902XB)
Brand	Foxboro
Origin	USA
Weight	0.35 kg
Dimensions	45 x 105 x 115 mm
Operating Temp	-40 to +70 deg C
Power Consumption	Passive bus backplane load (24 VDC redundant power input)
Input Channels	32 isolated analog input channels
Input Range	4-20 mA DC
Accuracy	+/-0.1% of span (Typical)
Resolution	16-bit A/D conversion
Isolation	Channel-to-channel and channel-to-system isolation
Enclosure Protection	IP65 rating with G3 conformal coating

4-20 mA HART Loop Protocol & Channel-to-Channel Isolation

The module processes 32 independent 4-20 mA DC transmitter inputs via internal 16-bit analog-to-digital converters, digitizing process variables for transmission across the system backplane. Galvanic channel-to-channel isolation decouples each signal loop electrically, preventing common-mode voltage spikes and ground loop currents from propagating between adjacent channels or to the primary control processor. If an open-circuit fault or field line breakdown occurs on a single loop, internal isolation circuits contain the failure locally, preserving signal processing accuracy on the remaining 31 channels.

Frequently Asked Questions

Q: Can a single 32-channel FBM42 (P0902XB) consolidate inputs from two 16-channel modules?

A: Consolidation is fully supported provided the field termination assembly (TA) and system control software database are configured to map the expanded 32-channel address space correctly.

Q: How does the FBM42 execute hardware failover in redundant baseplate setups?

A: When deployed as a dual-module pair on a redundant baseplate, both units track active 4-20 mA input signals simultaneously; if the primary unit triggers internal diagnostic faults, the secondary unit maintains input data flow without data loss.

Q: What physical diagnostics monitor the integrity of the input loops?

A: Integrated diagnostic logic executes continuous self-tests to identify hardware anomalies and detects open-circuit wiring faults, reporting channel status through front-panel LED indicators and backplane system alarms.

Field Installation Guidelines

Mount the module directly into the target slot of a standard Foxboro I/A Series baseplate, pressing firmly until the rear edge connectors seat completely and the retaining mechanical latches snap into place. Confirm that the field cabinet environment maintains temperature levels within the rated -40 to +70 deg C window and satisfies IP65 physical enclosure conditions.

Route 4-20 mA current loop wiring through dedicated cable trays, maintaining physical separation from high-voltage power lines and heavy inductive switching circuits to avoid noise coupling. Terminate field wiring at the corresponding termination assembly, torquing screw terminals to standard specification. Connect overall cable shields to a single safety earth bus bar at the cabinet entry panel to preserve 16-bit A/D signal resolution.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.