P0914XA P0914XB Foxboro Baseplate Module Technical Manual

Availability: 10 left in stock

Foxboro P0914XA P0914XB I/A Series Baseplate Analog Input Module Configured for high-resolution process variable acquisition within Foxboro I/A Series DCS...

SKU: P0914XA P0914XB

Manufacturer: Foxboro
Product No.: P0914XA P0914XB
Product Type: Analog Input Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 284g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Foxboro P0914XA P0914XB I/A Series Baseplate Analog Input Module

Configured for high-resolution process variable acquisition within Foxboro I/A Series DCS networks, the Foxboro P0914XA (P0914XA Isolated Analog Input Module) provides direct physical/electrical execution. The hardware executes real-time digitized monitoring of multiple independent process loops by converting current and voltage signals into data words via onboard 16-bit sigma-delta converters. The module mounts directly onto a designated FBM rack or baseplate assembly to establish deterministic communication links with upstream Fieldbus Communications Processors (FCP) or Fieldbus Control Modules (FCM) over a redundant 2 Mbps fieldbus network.

Hardware Specifications

Parameter	Specification
Model	P0914XA / P0914XB
Brand	Foxboro
Origin	United States
Weight	Module: 284 g; Terminal Assembly: 159 to 204 g
Dimensions	45 x 102 x 104 mm (Height with mechanical ear: 114 mm)
Operating Temp	-20 to +70 deg C
Power Consumption	Less than or equal to 7 W
Module Type	8-channel isolated analog input module
Number of Channels	8 independent channels
Supported Signals	0-20 mA DC, 0-100 mV DC, 0-5 V DC, 0-10 V DC
Resolution	16-bit sigma-delta conversion
Accuracy	\pm 0.05% of Full Scale (FS)
Isolation	2.5 kV galvanic isolation channel-to-channel and channel-to-ground
Communication Interfacing	2 Mbps redundant fieldbus connection
Power Supply	24 VDC nominal sourced directly via backplate bus
Compliance	CE, cULus, ATEX/IECEx, RoHS compliant

Channel-to-Channel Isolation and DCS Baseplate Control Interfacing

The internal circuit architecture enforces a 2.5 kV galvanic isolation barrier between individual input channels and internal backplane logic components. This channel-to-channel isolation safeguards the high-resolution sigma-delta circuitry from common-mode voltage spikes and ground potential fluctuations inherent in distributed field layouts. The analog frontend supports direct transparent configuration for both voltage and current signaling parameters. When measuring current inputs, the impedance tuning coordinates with standard 4-20 mA HART loop protocol parameters, preventing signal damping and ensuring secondary digital variables transmit to the host DCS without introducing errors into the primary analog measurement.

Frequently Asked Questions

Q: Does the P0914XA hardware support live insertion during active plant operations?

A: Yes, the module is engineered for hot-swappable installation. The backplane bus interface incorporates staggered connector pins that allow the chassis ground circuit to connect first during insertion and disconnect last during removal, protecting the active 2 Mbps redundant fieldbus from data packet corruption.

Q: How does the 16-bit sigma-delta converter handle out-of-range sensor failures?

A: The onboard microprocessors continuously monitor the digital conversion registers. If an input signal drifts beyond the calibrated upper or lower full-scale limits (e.g., a broken thermocouple or shorted 0-20 mA loop), the module transmits an out-of-range channel status flag via the backplane bus to execute predefined fail-safe logic in the host controller.

Field Installation Guidelines

Shield Grounding and Signal Separation Guidelines: Route all instrumentation signals through dedicated low-voltage wire ways separate from high-power AC distribution conduits. Terminate the overall cable shields explicitly at a single earth reference point inside the marshalling enclosure to maintain the 2.5 kV channel-to-channel isolation integrity.
DIN Rail and Rack Mounting Torque Constraints: Align the card guides with the slot channels on the P0914XA/P0914XB baseplate. Slide the module firmly into the slot until the extraction ear locks into position, and verify that the module-to-baseplate alignment allows the terminal assembly block to seat without straining the wiring junctions.
Environmental Sealing and Thermal Mitigation: Maintain a minimum 50 mm convective cooling space above and below the baseplate rack inside the enclosure. For field installations tracking near the +70 deg C operating threshold, ensure external forced-air ventilation is active to prevent localized thermal drift within the analog inputs.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.