Yokogawa PDB/16 Power Distribution Board
Configured for centralized electrical distribution in DCS control cabinet architectures, the Yokogawa PDB/16 (PDB/16 Power Distribution Board) provides direct physical and electrical execution of power routing to field I/O modules.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | PDB/16 |
| Brand | Yokogawa |
| Origin | Japan |
| Weight | 1 kg |
| Dimensions | Standard Rack-Mount Format |
| Operating Temp | Industrial Standard Range |
| Power Consumption | Variable per Load |
| Channels | 16 independent output channels |
| Input Voltage | 24 VDC or 220-240 VAC |
| Protection | Overcurrent and short-circuit isolation |
DCS Process Control Connectivity
The PDB/16 maintains stable voltage delivery across Yokogawa CENTUM VP and CS 3000 platforms through dedicated channel-to-channel isolation. This configuration mitigates the risk of voltage spikes propagating between independent I/O loops, ensuring that sensitive signal conditioning remains unaffected by power fluctuations. The board architecture supports standard 4-20 mA HART loop protocol power requirements, ensuring that connected instrumentation maintains consistent loop current. Proper distribution depends on maintaining a low-impedance connection to the central ground bus, which prevents noise coupling into the logic circuitry of the DCS modules.
Frequently Asked Questions
Q: Does the PDB/16 support hot-swapping of output channels?
A: No. The PDB/16 serves as a static power distribution interface. Any disconnection or modification of output wiring must be performed after isolating the input voltage to prevent arcing and potential damage to the distribution bus.
Q: How do the diagnostic LEDs indicate a short-circuit fault?
A: The PDB/16 features per-channel status LEDs. A darkened LED while the main power bus is energized signifies either an open circuit or that the internal overcurrent protection for that specific channel has tripped. Resetting requires physical inspection of the field wiring.
Field Installation Guidelines
- Mounting: Secure the board to the cabinet rack using the designated mounting points. Ensure the chassis maintains direct metal-to-metal contact with the cabinet frame to facilitate high-frequency grounding.
- Wiring: Use appropriately sized copper conductors for the input power feed. Ensure all output terminal connections are torqued to manufacturer specifications to prevent resistive heating at the junction points.
- Grounding: Terminate the common ground lug to the cabinet main earth bar using a low-impedance strap. This grounding path is required for the internal overcurrent and surge protection circuits to function effectively.
- Environment: Monitor the cabinet internal temperature. While the board is designed for industrial conditions, avoid mounting near heat-generating components or high-power AC drives to prevent premature degradation of the protection components.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
Yokogawa RB401-S4 RIO Bus Module Remote I/O Communication
$99.00
$199.00
Digital Output Module | Yokogawa SDV541-S53 ProSafe-RS
$99.00
$199.00
Yokogawa ATR8S-00 S2 Relay Output Module CENTUM DCS Series
$99.00
$199.00
Yokogawa AAM21-S2 Analog Input Module CENTUM DCS Series
$99.00
$199.00
Yokogawa AIP512-S2 Analog Input Module CENTUM VP DCS Series
$99.00
$199.00
Terminal I/O Module Nest CENTUM DCS Yokogawa AMN31-S1
$99.00
$199.00
MRO-234-A Yokogawa Relay Output Module Interface Card
$99.00
$199.00
RB301-S2 Yokogawa CENTUM CS Bus Interface Master Module
$99.00
$199.00
Yokogawa RB401-S4 RIO Bus Interface Master Card CENTUM CS/VP
$99.00
$199.00
Analog Output Module | YOKOGAWA AAM51-S2
$99.00
$199.00
YOKOGAWA FC1*C Interface Module Card
$99.00
$199.00
AAM10-S1 YOKOGAWA | Analog Input Module
$99.00
$199.00
YOKOGAWA AAM50-S1 Analog Output Module
$99.00
$199.00
NC4*B YOKOGAWA Node Control Unit
$99.00
$199.00
YOKOGAWA NCU4*A Node Control Unit Original
$99.00
$199.00
Node Interface Module YOKOGAWA NM29*A
$99.00
$199.00
NM6*D YOKOGAWA Node Interface Module
$99.00
$199.00
YOKOGAWA NP1*C Programmable Controller CPU Module
$99.00
$199.00
YOKOGAWA S9171BG-00 PAC*A Programmable Automation Controller
$99.00
$199.00
PS31*A YOKOGAWA CENTUM VP Regulated Power Supply Module
$99.00
$199.00
Remote Control I/O Module YOKOGAWA RC1*A CENTUM VP
$99.00
$199.00
YOKOGAWA RS81*B CENTUM XL Micro XL Interface Card
$99.00
$199.00
Multi Status Input Interface Card YOKOGAWA ST2*D CENTUM VP
$99.00
$199.00
ST3*D YOKOGAWA CENTUM VP Multi Status Input Interface Card
$99.00
$199.00
HART-Enabled Analog I/O Module YOKOGAWA VM1*B CENTUM VP
$99.00
$199.00
VM1*D YOKOGAWA CENTUM VP HART-Enabled Analog I/O Module
$99.00
$199.00
YOKOGAWA VM2*D CENTUM VP HART-Enabled Analog I/O Module
$99.00
$199.00
YNT512D-Q12 YOKOGAWA CENTUM VP Bus Repeater Module
$99.00
$199.00
YOKOGAWA AAM21-S2 CENTUM CS 3000 Analog Input Module
$99.00
$199.00
AMM12T-S2 YOKOGAWA CENTUM VP Analog Input Multiplexer Module
$99.00
$199.00
YOKOGAWA F3CX04-0N FA-M3 4-Channel Pulse Input Module
$99.00
$199.00
YOKOGAWA F3AD08-4V FA-M3 8-Channel Analog Input Module
$99.00
$199.00
F3BU13-0N FA-M3 YOKOGAWA 13-Slot PLC Base Unit
$99.00
$199.00
YOKOGAWA F3LE12-0T FA-M3 Ethernet Communication Module
$99.00
$199.00
YOKOGAWA ST4*D CENTUM VP Multi Status Input Interface Card
$99.00
$199.00
YOKOGAWA F3LR02-0N FA-M3 Redundancy Interface Module
$99.00
$199.00
Power Supply Module YOKOGAWA F3PU30-0S FA-M3 Series
$99.00
$199.00
F3XC08-0C FA-M3 YOKOGAWA Digital Output Relay Module
$99.00
$199.00
YOKOGAWA F3XD16-3F FA-M3 Series Digital Input Module
$99.00
$199.00
Analog Input Output Module YOKOGAWA AAP135-S00 CENTUM VP
$99.00
$199.00
AAM11-S2 YOKOGAWA Analog Input Module Process Control
$99.00
$199.00
YOKOGAWA AAI543-S50 CENTUM VP Analog Output Module
$99.00
$199.00
F3YC08-0C YOKOGAWA FA-M3 Datasheet & Technical Manual
$99.00
$199.00
Guide
Translation missing: en.general.search.loading