RH924YA Foxboro FCP280 Datasheet & Technical Manual

Availability: 10 left in stock

Foxboro RH924YA FCP280 Field Control Processor The Foxboro RH924YA, also cataloged as the FCP280 Field Control Processor, operates as a...

SKU: FOXBORO FCP280 RH924YA

Manufacturer: Foxboro
Product No.: FOXBORO FCP280 RH924YA
Product Type: Central Processing Units
Product Origin: USA
Payment:T/T, Western Union
Weight: 180g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Foxboro RH924YA FCP280 Field Control Processor

The Foxboro RH924YA, also cataloged as the FCP280 Field Control Processor, operates as a dedicated hardware component for control logic execution and fieldbus module management within Foxboro I/A Series DCS platforms. The unit performs deterministic regulatory loop calculations and real-time processing of physical subsystem data without external system dependencies.

Hardware Specifications

Parameter	Specification
Model	RH924YA
Brand	Foxboro
Origin	USA
Weight	0.18 kg
Dimensions	161 x 110 x 20 mm
Operating Temp	0 to +60 deg C
Power Consumption	Less than or equal to 10 W
System Compatibility	Foxboro I/A Series DCS
Processor	Embedded high-speed CPU
Memory	128 MB SDRAM, 64 MB Flash
Communication Interfaces	Redundant 100 Mbps Ethernet, proprietary Foxboro fieldbus
Power Supply	24 VDC nominal
Humidity	Up to 95% RH (non-condensing)
Shock/Vibration	15 g shock, 0.05 g rms vibration
Certifications	CE, UL, CSA, IEC 61131-2

Channel-to-Channel Isolation & DCS Connectivity

The control architecture enforces structural channel-to-channel isolation between internal processing cores and peripheral field network segments. Communication management utilizes standard 4-20 mA HART loop protocol pass-through mapping alongside native 100 Mbps Ethernet pathways. This configuration eliminates electrical ground loop propagation between interconnected Fieldbus Modules (FBMs) and prevents localized electrical field faults from degrading central processor operations during real-time loop updates.

Frequently Asked Questions

Q: How does the module handle a hot-swap or hardware synchronization transition during failure? A: In a redundant configuration, the backup FCP280 maintains concurrent memory mirroring via the redundant backplane paths. If the primary processor experiences an unrecoverable fault, the backup executes an immediate, bumpless transfer of control within milliseconds, sustaining active communication loops without signal dropouts.

Q: What are the restrictions regarding the memory backup and firmware flash compatibility? A: Firmware images are stored inside the 64 MB onboard flash memory. Upgrades require verification of structural baseline limits defined by the specific Foxboro software environment version. During sudden power interruptions, system status maps are non-volatile, eliminating database degradation risks.

Q: Are the Ethernet diagnostic ports isolated from the internal process control logic? A: Yes, physical isolation barriers protect the redundant 100 Mbps Ethernet communication circuits. This design isolates transient electrical noise on external supervisory networks from interfering with deterministic internal control logic routines executing on the primary CPU.

Field Installation Guidelines

Mounting Sequence: Secure the FCP280 directly onto the designated FBM rack or industrial DIN rail structure. Ensure the top and bottom grounding clips lock into position onto the metallic carrier assembly to provide a low-impedance path to the functional earth ground.
Shielding Rules: All external Ethernet and proprietary fieldbus communication lines must use shielded, twisted-pair cabling. Connect the cable shields to the system common ground bus bar at the entry point of the cabinet panel, keeping exposed unshielded wires shorter than 50 mm.
Separation of Cables: Route the low-voltage 24 VDC power feed and digital network lines through specialized, isolated wire ducts. Do not route these communication conductors in parallel within the same duct as inductive high-voltage AC or motor control circuits.
Redundant Power Configuration: Connect two independent, certified 24 VDC power sources to the backplane power terminals. This configuration ensures continuous control execution if a single upstream power distribution panel fails.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.