RH926JM Foxboro 8 Slot Panel Baseplate Datasheet & Technical Manual

Availability: 10 left in stock

Foxboro RH926JM Panel 8 Slots Vertical Baseplate The Foxboro RH926JM, also cataloged as the RH926JM Panel 8 Slots Vertical Baseplate,...

SKU: RH926JM

Manufacturer: Foxboro
Product No.: RH926JM
Product Type: Industrial Baseplates
Product Origin: USA
Payment:T/T, Western Union
Weight: 2500g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Foxboro RH926JM Panel 8 Slots Vertical Baseplate

The Foxboro RH926JM, also cataloged as the RH926JM Panel 8 Slots Vertical Baseplate, operates as a dedicated hardware component for mechanical mounting and electrical interconnection within Foxboro I/A Series networks. This 8-slot vertical structural assembly provides direct physical/electrical execution for 200 Series Fieldbus Modules (FBMs), control processors, and communication interface links via an integrated passive backplane bus.

Hardware Specifications

Parameter	Specification
Model	RH926JM
Brand	Foxboro
Origin	USA
Weight	2.5 kg
Dimensions	17.5 x 5.5 x 2.5 inches
Operating Temp	0 to +60 deg C
Power Consumption	Passive (determined by installed module loads)
Slot Capacity	8 vertical module positions
System Compatibility	Foxboro I/A Series, 200 Series modules
Power Inputs	Dual 24 VDC (primary and redundant)
Backplane Type	Passive (no active electronics)
Communication Interfaces	Dual Fieldbus channels (A/B), time synchronization interface
Housing Material	Corrosion-resistant cast aluminum
Humidity	0-95% RH, non-condensing
Certifications	CE, RoHS, IEC 61131-2 compliant

Process Control & DCS Backplane Connectivity

The baseplate is engineered with a passive backplane structure, carrying independent dual Fieldbus communication channels (A/B) and a dedicated time synchronization interface link. It supports direct 4-20 mA HART loop protocol routing and discrete telemetry exchange from field modules to the controller layer. The physical copper routing pathways ensure structural channel-to-channel isolation limits, suppressing data cross-talk and high-frequency electrical noise across all 8 high-density module positions.

Frequently Asked Questions

Q: Does the passive design of this baseplate impose limits on hot-swappable module operations? A: No, the passive backplane architecture contains zero active electronics, eliminating localized semiconductor failure risks. It supports direct hot-swappable installation routines, allowing active FBMs to be inserted or removed without creating voltage drops or transmission interruptions across neighboring slots.

Q: How does the baseplate manage dual redundant 24 VDC power distribution? A: The cast aluminum frame houses independent power trace vectors for primary and secondary 24 VDC inputs. If one upstream power grid fails, the dual-channel backplane routes power from the redundant rail instantaneously, preventing systemic downtime or process state degradation.

Q: Are there communication limitations when mixing standard and sequence of events modules on the same baseplate? A: The backplane distributes data paths unrestrictedly for all standard Foxboro 200 Series modules. However, full system compatibility depends on configuring the matching communication line (such as the AD202MW line) to handle the specific scan rates and time-stamping intervals across the controller interface.

Field Installation Guidelines

Vertical Orientation Alignment: Install the cast aluminum baseplate vertically inside the designated control cabinet structure. Secure the chassis via the standard panel mounting screw points to eliminate mechanical sagging or misalignment under full module load.
Grounding Connection: Establish a low-impedance connection between the baseplate frame and the centralized enclosure earth ground bus bar. Direct bonding ensures effective draining of electromagnetic interference and maintains structural isolation validation parameters.
Redundant Wire Routing: Feed the primary and secondary 24 VDC supply lines through independent cabinet wiring ducts. Maintain a minimum separation distance of 30 cm from high-voltage AC conductors or inductive motor switching lines to block high-frequency noise injection.
Module Latching Verification: When inserting processors or FBMs, slide the units firmly into the slot guides until the rear connectors align and latch. Verify mechanical engagement to prevent intermittent communication dropouts caused by localized industrial vibration.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.