9853-610 TRICONEX Tricon V9/V10 Datasheet & Technical Manual

TRICONEX 9853-610 Tricon V9/V10 Series Termination Panels

TRICONEX 9853-610 Tricon V9/V10 Series Termination Panels

Availability: 10 left in stock

TRICONEX 9853-610 Tricon V9/V10 Series Terminal Board The TRICONEX 9853-610, also cataloged as the 9853-610 Termination Panel, operates as a...

SKU: 9853-610

Manufacturer: Triconex
Product No.: 9853-610
Product Type: Termination Panels
Product Origin: USA
Payment:T/T, Western Union
Weight: 1500g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

TRICONEX 9853-610 Tricon V9/V10 Series Terminal Board

The TRICONEX 9853-610, also cataloged as the 9853-610 Termination Panel, operates as a dedicated hardware component for field signal distribution within Tricon V9/V10 Series SIS racks. The board routes field-derived analog output current loops from centralized control cards to direct-wired actuators and validation circuits.

Hardware Specifications

Parameter	Specification
Model	9853-610
Brand	TRICONEX (Schneider Electric)
Origin	United States (or per manufacturer allocation)
Weight	1.5 - 2.0 kg
Dimensions	177.8 mm x 101.6 mm x 228.6 mm
Operating Temp	-20 to +60 deg C
Power Consumption	15 W typical
Panel Type	Current output, basic
Active Points	8
Compatible Modules	2870H (HART analog output), 3805E/H (4-20 mA TMR)
Termination Style	Screw-clamp terminals, accepts 12-22 AWG wire
Isolation	1500 VAC galvanic isolation between backplane and field wiring
Safety Integrity Level	SIL3 (IEC 61508 / IEC 61511)
Storage Temp	-40 to +85 deg C
Humidity Range	5% to 95% non-condensing
Certifications	IEC 61508 SIL3, TÜV, CE, UL Class I Div 2, ATEX Zone 2

Triple Modular Redundancy and Safety Integrity

The termination panel architecture supports a fault-tolerant interface configuration built for triple modular redundancy (TMR) 2oo3 systems. Galvanic isolation rated at 1500 VAC separates the field loops from the primary backplane, protecting the core processing logic against transient overvoltages and grounding noise. The internal track design routes parallel signals from compatible 2870H or 3805E/H TMR modules down to individual screw-clamp fields, achieving continuous fail-safe state execution through dedicated diagnostic paths that prevent a single field wiring short from failing the overall instrumentation loop.

Frequently Asked Questions

Q: Which explicit interface modules can interface with the 9853-610 terminal board assembly?

A: The board interfaces directly with module part number 2870H (an 8-point HART analog output interface module) and module part number 3805E/H (an 8-point, 4-20 mA commoned-return, DC-coupled TMR analog output module).

Q: What grounding and physical isolation boundaries must be maintained during installation?

A: The board provides up to 1500 VAC galvanic isolation between the field wiring terminals and the control backplane logic. For operation, field teams must maintain independent cable shielding loops bonded directly to a low-impedance master ground to prevent spurious trips during module hot-swap actions.

Field Installation Guidelines

Mount the termination board securely inside the Tricon V9/V10 chassis enclosure using designated DIN-rail or backplane bracket anchors. Ensure the interface cables from the 2870H or 3805E/H modules are locked completely into the panel input header sockets. Terminate all field cabling using the on-board screw-clamp terminals, keeping within the supported 12-22 AWG wire spectrum. Ground the external instrument shielding drain wires at the unified enclosure grounding bar to control electromagnetic interference (EMI). Route the 4-20 mA active current loops through isolated high-density wire ducts separated by physical barriers from any raw AC mains power conductors.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.