Yokogawa ADV151-H50 HART Digital Input

Yokogawa ADV151-H50 HART Digital Input | Smart Device DCS

Availability: 99 left in stock

Product Overview The Yokogawa ADV151-H50/D5A00 functions as an advanced 32-channel digital input interface for CENTUM VP and ProSafe-RS Distributed Control Systems. Unlike standard modules, the ADV151-H50...

SKU: ADV151-H50/D5A00

Manufacturer: Yokogawa
Product No.: ADV151-H50/D5A00
Product Type: HART Input Modules
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 650g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Product Overview

The Yokogawa ADV151-H50/D5A00 functions as an advanced 32-channel digital input interface for CENTUM VP and ProSafe-RS Distributed Control Systems. Unlike standard modules, the ADV151-H50 supports HART communication, allowing the DCS to acquire traditional digital status signals while simultaneously extracting diagnostic data from smart field devices. This dual-capability makes it a vital component for modernizing plants that require high-density I/O alongside deep-level device health monitoring.

Condition: 100% Brand New Original.

Part Number Breakdown: ADV151 Series

Yokogawa's suffix and option codes define the diagnostic capabilities and physical wiring interface of the ADV151 hardware.

ADV151: Digital Input Module (32-channel, 24 V DC, Isolated).
-H: HART-enabled type for smart device integration and advanced diagnostics.
5: Standard configuration without status display; no explosion protection.
0: Basic hardware type.
/D5A00: Includes KS Cable Interface Adapter [Model: ATD5A-00] for 32-channel digital connectivity.

Technical Specifications

The ADV151-H50/D5A00 utilizes high-speed logic and robust isolation to protect the system backplane while maintaining 1ms response times.

Parameter	Specification
Number of Channels	32 (Individually Isolated)
HART Support	Yes (For diagnostics and device integration)
Rated Input Voltage	24 V DC
Input Current	7 mA per channel
Response Time	< 1 ms (High-speed capture)
Isolation Strength	Channel-to-channel and Channel-to-system
Interface Style	KS Cable Interface Adapter (/D5A00)
Operating Temperature	0°C to +50°C
Dimensions	130 × 107.5 × 32.8 mm

Engineering Advantages

Smart Device Integration: The integrated HART support eliminates the need for separate diagnostic hardware. This module passes smart device parameters directly to the control station, allowing operators to monitor sensor health, configuration, and calibration status without leaving the control room.
Ultra-Fast Signal Acquisition: A response time of less than 1 ms ensures the system catches every critical state change. This speed proves essential for high-frequency switching applications and safety interlocks where delayed detection could lead to equipment damage.
Simplified Marshaling with KS Cables: The /D5A00 interface adapter enables the use of pre-fabricated KS cables. This reduces point-to-point manual wiring in the cabinet, significantly lowering commissioning time and virtually eliminating wiring errors during high-density I/O installation.
Fault Isolation Architecture: Robust channel-to-channel isolation prevents electrical noise or field-side surges from migrating into adjacent loops or the system logic. If a single field contact shorts, the remaining 31 channels continue to function normally, maintaining maximum process availability.

FAQs

Q: Does the ADV151-H50/D5A00 support Sequence of Events (SOE) capture?

A: No. While the ADV151-E revision specifically targets SOE, the ADV151-H revision focuses on HART communication and smart device diagnostics. Choose the -H model if you require device health data rather than 1ms time-stamped SOE logs.

Q: Can I connect this module to third-party terminal boards?

A: Yes. The /D5A00 option provides the KS cable interface, which is the standard Yokogawa connector for interfacing with various terminal boards (such as the AED5D or similar). Always verify that the pinout of your third-party board matches Yokogawa’s KS cable standard.

Q: Is it possible to hot-swap this module while the system is running?

A: Yes. When you configure the ADV151 in a redundant pair on the FIO backplane, you can replace a faulty module without disrupting the 32 input signals, ensuring continuous monitoring of critical safety interlocks.

Q: What is the maximum distance for the KS cable connection?

A: While specific distances depend on cable gauge and environmental noise, Yokogawa typically recommends keeping KS cable lengths within the standard range specified for the FIO system to maintain high-speed digital signal integrity.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.