AIP434-S1 YOKOGAWA CENTUM VP Datasheet & Technical Manual

YOKOGAWA AIP434-S1 CENTUM VP Analog Input Module

YOKOGAWA AIP434-S1 CENTUM VP Analog Input Module

Availability: 10 left in stock

YOKOGAWA AIP434-S1 Analog Input Module The YOKOGAWA AIP434-S1, also cataloged as the AIP434 Analog Input Module, serves as the primary...

SKU: AIP434 S1

Manufacturer: Yokogawa
Product No.: AIP434 S1
Product Type: Analog Input Modules
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 800g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

YOKOGAWA AIP434-S1 Analog Input Module

The YOKOGAWA AIP434-S1, also cataloged as the AIP434 Analog Input Module, serves as the primary AIP434 Analog Input Module utilized to execute high-resolution signal acquisition across CENTUM VP FIO Node Unit platforms.

Hardware Specifications

Parameter	Specification
Model	AIP434-S1
Brand	YOKOGAWA
Origin	Japan
Weight	0.8 kg
Dimensions	130 x 25 x 250 mm
Operating Temp	0 deg C to +55 deg C
Power Consumption	6 to 8 W
Input Channels	16 channels
Signal Range	4-20 mA DC
Accuracy	+/- 0.1% of span

Process Control Connectivity and Isolation

The module integrates directly into the Vnet/IP control architecture, facilitating data exchange via the FIO baseplate. To maintain signal integrity in industrial environments, the circuitry employs channel-to-channel isolation and channel-to-backplane isolation. This architecture prevents common-mode noise propagation and ground loops. The module supports real-time diagnostics, including open-circuit detection and internal health monitoring, with status reported directly to the Field Control Unit (FCU) via the deterministic sampling cycle.

Frequently Asked Questions (FAQ)

Q: Is this module compatible with existing CENTUM VP FIO node units?

A: Yes, the AIP434-S1 is designed specifically for installation on standard FIO baseplates, such as the A2BE1D or A2BE2D, and is compatible with AFV10D or A2FV control units.

Q: Can the module be replaced while the system is powered?

A: The hardware supports standard FIO slot insertion; however, operators must adhere to local safety procedures regarding power-off constraints for specific node units to prevent signal transients during maintenance.

Field Installation Guidelines

Mounting: Ensure the FIO baseplate is properly secured to the cabinet rail. Align the module with the guide rails of the designated slot and insert until the backplane connector is fully seated.
Wiring: Use shielded twisted-pair cables for all 4-20 mA signal inputs to mitigate electromagnetic interference. Terminate the shield at the cabinet grounding bar rather than the module terminal to maintain isolation integrity.
Environmental Compliance: Ensure the installation environment meets ISA G2 standard requirements. Maintain clearance around the module to allow for natural convection cooling, as the unit dissipates up to 8 W during continuous operation.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.