F3YD32-1P Yokogawa Transistor Output Module

Yokogawa F3YD32-1P FA-M3 Transistor Output Module

Yokogawa F3YD32-1P FA-M3 Transistor Output Module

Availability: 10 left in stock

Yokogawa F3YD32-1P FA-M3 PLC Transistor Output Module Configured for discrete digital output control in FA-M3 PLC platforms, the Yokogawa F3YD32-1P...

SKU: F3YD32-1P

Manufacturer: Yokogawa
Product No.: F3YD32-1P
Product Type: Transistor Output Modules
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 110g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Yokogawa F3YD32-1P FA-M3 PLC Transistor Output Module

Configured for discrete digital output control in FA-M3 PLC platforms, the Yokogawa F3YD32-1P (F3YD32 Transistor Output Module) provides direct physical/electrical execution. The hardware targets multi-channel switching loops to actuate relays, solenoids, and indicators via a low-side sink configuration. It relies on phototransistor arrays to maintain signal isolation between logic circuitry and external field wiring loops.

Hardware Specifications

Parameter	Specification
Model	F3YD32-1P
Brand	Yokogawa
Platform	FA-M3 PLC series
Output Type	Transistor (sink type)
Channels	32 channels
Common Architecture	8 points per common line
Isolation Method	Photocoupler isolation
Rated Load Voltage	12 to 24 V DC
Operating Voltage Range	10.2 to 26.4 V DC
Max Load Current	0.1 A per point / 0.5 A per common
Response Time	1 ms maximum (ON to OFF, OFF to ON)
ON Voltage Drop	0.5 V DC maximum
OFF Leakage Current	0.1 mA maximum
Internal Current Consumption	160 mA at 5 V DC
External Power Supply	12 to 24 V DC, 95 mA maximum
Withstanding Voltage	1500 V AC for 1 minute
Built-in Protection	Short-circuit controlled, overheat shutdown, surge clamp
Weight	0.11 kg
Dimensions	84.5 x 102 x 28.9 mm
Operating Temperature	0 to 55 deg C
Storage Temperature	-20 to 75 deg C
Ambient Humidity	5 to 95% RH (non-condensing)

Process Control Loops and DCS Instrument Integration

The module implements 4-20 mA HART loop protocol compatibility buffers and channel-to-channel isolation parameters through its optocoupler network. This physical isolation prevents field ground loops from bleeding electrical noise into the FA-M3 backplane data bus. Field signals routed through the internal logic architecture interface directly with cold junction compensation units when mapping diagnostic temperatures across hybrid DCS architectures. The sink-type configuration guarantees a defined current path back to the reference return line of the power supply.

Frequently Asked Questions

Q: What is the primary cause of an individual channel thermal shutdown?

A: An overcurrent condition exceeding 0.1 A per point or a dead short across the output transistor causes localized junction heating, triggering the internal thermal protection circuit until temperature thresholds recover.

Q: Can this module mix different voltages across its common groups?

A: Yes. The module is split into 4 independent isolated common blocks containing 8 points each. Each common block can operate at a distinct load voltage within the 10.2 to 26.4 V DC operational range.

Q: Is hot-swapping supported on the base unit for this module?

A: No. System power to the FA-M3 base unit must be isolated before inserting or extracting the module to prevent electrical arcing across the backplane pins.

Field Installation Guidelines

Grounding Protocol: Ensure the terminal block shield wire connects to a single low-resistance instrumentation earth point. Do not loop the ground between adjacent high-power inductive circuits.
Separation of Cables: Route the DC field wiring separate from AC power distribution lines to prevent induced electromagnetic noise inside the 1 ms response window.
Wire Termination: Strip field wires back to specified lengths and torque terminal screws to industrial standards to maintain mechanical integrity under continuous vibration.
External Power Supply: Verify that the external 12 to 24 V DC supply meets current capacity specs, accounting for the 95 mA standby consumption plus the aggregate load current of the active channels.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.