FC311-S1 Yokogawa CENTUM Series Datasheet & Technical Manual

Yokogawa FC311-S1 CENTUM VP Bus Interface Module

Yokogawa FC311-S1 CENTUM VP Bus Interface Module

Availability: 99 left in stock

Yokogawa FC311-S1 Bus Station Module The Yokogawa FC311-S1, also cataloged as the FC311 S1 Bus Interface Module, operates as a...

SKU: FC311 S1

Manufacturer: Yokogawa
Product No.: FC311 S1
Product Type: Bus Interface Modules
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 520g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Yokogawa FC311-S1 Bus Station Module

The Yokogawa FC311-S1, also cataloged as the FC311 S1 Bus Interface Module, operates as a dedicated hardware component for bus station identification, data routing, and network synchronization within CENTUM XL and CENTUM VP Distributed Control Systems.

Hardware Specifications

Parameter	Specification
Model	FC311-S1
Brand	Yokogawa
Origin	Japan
Weight	0.52 - 1.0 kg
Dimensions	28 x 25 x 3 cm
Operating Temp	0 deg C to +55 deg C
Power Consumption	12.3 W
Communication Protocol	HF/RL Bus / High-speed Field Control Bus
System Compatibility	CENTUM XL, CENTUM VP
Redundancy	Dual-redundant configuration supported

Process Control and Communication Connectivity

The FC311-S1 utilizes a deterministic communication architecture to manage control logic across the Yokogawa DCS infrastructure. It handles high-speed data exchange via the HF Bus, ensuring precise synchronization between the field control station and the operator stations. The module facilitates channel-to-channel communication management, which is critical for maintaining integrity within a dual-redundant architecture. Proper system integration requires verification of firmware compatibility, especially when migrating from legacy CENTUM XL environments to modern CENTUM VP platforms, as the module adapts its internal routing logic based on the host bus interface protocol.

Frequently Asked Questions

Q: Does the FC311-S1 support hot-swapping during active system operation?

A: Hot-swapping capabilities depend on the specific backplane configuration and the redundant power supply status. Always ensure the secondary module is synchronized and taking over the load before extracting a primary unit to prevent communication loss.

Q: Is the module compatible with all power supply units?

A: No, the module is designed for operation with specific Yokogawa PW series power modules, such as the PW481, PW482, and PW484. Ensure the voltage output matches the load requirements of the redundant bus setup.

Field Installation Guidelines

Environmental Preparation: Ensure the installation site maintains an ambient temperature between 0 deg C and +55 deg C. If installing in a legacy cabinet, verify that the forced-air ventilation system is fully operational.
Mounting: The module is designed for standard cabinet mounting. Ensure that the chassis is properly grounded to the cabinet bus bar to minimize electromagnetic interference (EMI) affecting the HF Bus signals.
Connectivity: Verify that all bus connectors are seated firmly. When configuring redundant pairs, ensure that both modules are initialized in the correct master/backup order through the system engineering interface to prevent address conflicts on the communication bus.
Cabling: Route signal cables away from high-voltage power lines to maintain signal integrity for the HF/RL bus communications.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.