NFAR181-S50 Yokogawa RTD Input Module

Yokogawa NFAR181-S50/R8S10 RTD Input Module FIO Subsystem Analog Card

Yokogawa NFAR181-S50/R8S10 RTD Input Module FIO Subsystem Analog Card

Availability: 10 left in stock

Yokogawa NFAR181-S50 RTD Input Module Configured for high-accuracy temperature acquisition in FIO subsystems, the Yokogawa NFAR181-S50 (NFAR181-S50/R8S10 RTD Input Module)...

SKU: NFAR181-S50

Manufacturer: Yokogawa
Product No.: NFAR181-S50
Product Type: Analog Input Modules
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 200g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Yokogawa NFAR181-S50 RTD Input Module

Configured for high-accuracy temperature acquisition in FIO subsystems, the Yokogawa NFAR181-S50 (NFAR181-S50/R8S10 RTD Input Module) provides direct physical electrical execution for Pt100 sensor integration.

Hardware Specifications

Parameter	Specification
Model	NFAR181-S50/R8S10
Brand	Yokogawa
Origin	Japan
Weight	0.2 kg
Dimensions	Standard FIO rack-mount form factor
Operating Temp	-10 deg C to +55 deg C
Power Consumption	450 mA at 5 V DC
Channel Capacity	12 Isolated channels
Signal Compatibility	Pt100 (3-wire configuration)

Process Control and RTD Signal Processing

The NFAR181-S50 module serves as a specialized input interface for 12-channel Pt100 RTD sensing. It delivers a measurement range of -200 deg C to 800 deg C with a resolution of 1 second per update cycle. Each channel is galvanically isolated to 1500 V AC to prevent ground loop noise and transient voltage propagation into the system backplane. The module employs a 1 mA measurement current to excite the RTD elements, ensuring minimal self-heating errors while maintaining a temperature drift specification of 30 ppm/deg C. Additionally, the unit features configurable burn-out detection, which triggers a status alert within 60 seconds if a sensor open-circuit condition is identified.

Frequently Asked Questions

Q: Can this module accommodate 2-wire RTD configurations?

A: The module is designed specifically for 3-wire Pt100 RTD configurations. Using 2-wire sensors will result in significant measurement inaccuracies due to lead-wire resistance, which cannot be compensated for by the hardware.

Q: Is the update rate of 1 second fixed or adjustable?

A: The data refresh cycle is fixed at 1 second per channel. This timing is optimized for stability in process-level temperature monitoring and cannot be reduced for high-speed dynamic applications.

Q: What is the procedure for clearing a burn-out detection status?

A: Once a sensor fault is detected, the status remains latched in the controller registers. Repair the physical sensor connection, and then perform a reset via the engineering station to clear the diagnostic fault flag.

Field Installation Guidelines

Lead-Wire Resistance: When installing Pt100 sensors, ensure all three lead wires have identical length and gauge. This maintains the bridge balance required for the module to effectively cancel out lead-wire resistance.
Termination and Shielding: Use shielded multi-core cables to connect the RTDs. Terminate the cable shields at a dedicated ground terminal on the cabinet chassis to reduce electromagnetic interference. Avoid routing signal cables in the same conduit as high-voltage AC power or variable frequency drive outputs.
Grounding: The module's isolated architecture relies on a solid cabinet ground connection. Verify that the chassis ground stud is tightly connected to the main earthing bus to ensure that the 1500 V AC isolation rating remains effective.
Environmental Handling: Protect the module from moisture and corrosive gases during installation. Given the -10 deg C to 55 deg C rating, ensure the field enclosure is appropriately ventilated to prevent internal temperatures from exceeding the maximum limit during peak ambient conditions.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.