ST4D YOKOGAWA CENTUM DCS Datasheet & Technical Manual

YOKOGAWA ST4*D CENTUM VP Multi Status Input Interface Card

YOKOGAWA ST4*D CENTUM VP Multi Status Input Interface Card

Availability: 10 left in stock

YOKOGAWA ST4*D Multi Status Input Card Configured for field signal termination in CENTUM VP and CS 3000 DCS platforms, the...

SKU: ST4*D

Manufacturer: Yokogawa
Product No.: ST4*D
Product Type: Interface Modules
Product Origin: Japan
Payment:T/T, Western Union
Weight: 900g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

YOKOGAWA ST4*D Multi Status Input Card

Configured for field signal termination in CENTUM VP and CS 3000 DCS platforms, the YOKOGAWA ST4*D (ST4D Multi Status Input Card) provides direct physical/electrical execution of sensor-to-controller signal interface management.

Suffix Breakdown & Model Matrix

ST4: Base model identifier for multi-status signal termination and input interface functionality.
*D: Hardware revision and interface designation indicating compatibility with specific I/O module bus structures.

Hardware Specifications

Parameter	Specification
Model	ST4*D
Brand	YOKOGAWA
Origin	USA
Weight	0.9 kg
Dimensions	356 × 178 × 25 mm
Operating Temp	-10 deg C to +55 deg C
Power Consumption	N/A (Passive termination)
I/O Type	Multi-Status Analog/Digital
Isolation	Electrical
Protection	Built-in Surge Suppression

DCS Process Control & Isolation Attributes

The ST4*D functions as a primary interface layer for field instrumentation, facilitating the transition between external field wiring and internal DCS signal processing modules. To preserve measurement integrity, the card incorporates electrical isolation between the field wiring terminal block and the system bus, effectively mitigating common-mode voltage contamination. The design features integrated surge protection circuitry to shield downstream I/O modules from transient voltage spikes originating in the field-side cable runs. Furthermore, the unit provides cold junction compensation (CJC) pathing for thermocouple-based inputs, ensuring that terminal block thermal gradients do not influence the accuracy of the connected analog input circuitry during process monitoring.

Frequently Asked Questions

Q: Does the ST4D card require external power for operation? A: No, the ST4D serves as a passive signal termination and interface assembly; power for the associated field devices is provided via the connected I/O module loops.

Q: How should I verify the integrity of the integrated surge protection?

A: The surge protection components are designed for industrial longevity. However, if a high-energy transient event occurs, perform a continuity check on the suppression paths and replace the unit if impedance measurements deviate from established baseline values.

Q: Can this module be utilized for both analog and digital signals simultaneously?

A: Yes, the terminal architecture permits the routing of mixed analog and digital signals, provided that the wiring segregation standards for the connected DCS I/O modules are maintained.

Field Installation Guidelines

Mounting: Secure the card into the system rack using the provided mounting holes. Ensure the chassis is bonded to the cabinet's equipotential ground plane to maximize the effectiveness of the internal surge protection.
Wiring: Utilize shielded instrumentation-grade cable for all analog signals. Terminate shields at the cabinet-level grounding rail rather than at the card itself to prevent ground loops.
Signal Isolation: Maintain physical separation of at least 150 mm between the termination assembly wiring and high-current power conductors to prevent inductive noise injection into the signal loops.
Maintenance: Periodically inspect terminal screw torque to ensure low-resistance connections, particularly in environments subject to vibration.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.