VC401-11 Yokogawa V Net Coupler Module

Yokogawa VC401-11 CENTUM VP V Net Coupler Module

Yokogawa VC401-11 CENTUM VP V Net Coupler Module

Availability: 20 left in stock

Yokogawa VC401-11 V Net Coupler Module The Yokogawa VC401-11, also cataloged as the VC401 V Net Coupler Module, operates as...

SKU: VC401-11

Manufacturer: Yokogawa
Product No.: VC401-11
Product Type: Communication Modules
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 200g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Yokogawa VC401-11 V Net Coupler Module

The Yokogawa VC401-11, also cataloged as the VC401 V Net Coupler Module, operates as a dedicated hardware component for network bridging and data bus coupling within CENTUM VP DCS platforms.

Hardware Specifications

Parameter	Specification
Model	VC401-11
Brand	Yokogawa
Origin	Japan
Weight	0.2 kg
Dimensions	3.8 cm x 15.2 cm x 12.7 cm
Operating Temp	-10 to +50 deg C
Power Consumption	1.2 W (12 to 24 VDC via backplane)
Supported Networks	Vnet/IP (100 Mbps), V net (10 Mbps), VL net
Network Architecture	Single or dual-redundant setups
System Compatibility	Yokogawa CENTUM VP DCS
Mounting	Chassis rack mount
Tariff Code	8517620050

Process Control and Protocol Bridging

The Yokogawa VC401-11 establishes continuous signal transformation between high-speed Vnet/IP networks and traditional V net or VL net data buses. Incorporating optocoupler isolation and channel-to-channel isolation, the module eliminates ground loop interference across interconnected human interface stations and field control units. Operating in dual-redundant communication configurations, the unit maintains steady data packet conversion with negligible transmission delay, executing instantaneous hardware switchover when primary signal paths encounter bus failures.

Frequently Asked Questions

Q: Can maintenance personnel replace the VC401-11 coupler module while the host DCS chassis remains powered?

A: Yes. The module features hot-swap capability, allowing live installation or removal without disrupting active network communication on adjacent cards.

Q: What power inputs are required to operate the VC401-11 within the CENTUM VP chassis?

A: The module draws power directly from the internal system backplane across a 12 to 24 VDC supply rail, consuming approximately 1.2 W during standard operation.

Field Installation Guidelines

Observe static electricity protection procedures prior to handling the coupler module. Slide the board smoothly along the CENTUM VP rack guide rails until the rear backplane connectors seat completely. Tighten the front panel mounting screws to establish functional ground shielding against high-frequency electromagnetic interference. Route external bus cables with clear physical separation from high-voltage AC power wiring to maintain signal line integrity across all network nodes.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.