330908-12-31-10-02-00 Bently Nevada Sensor

330908-12-31-10-02-00 Bently Nevada 3300 XL NSv Proximity Probe

330908-12-31-10-02-00 Bently Nevada 3300 XL NSv Proximity Probe

Disponibilidad: 10 Quedan en stock

Configured for high-precision shaft displacement and vibration measurement in compact mechanical spaces, the Bently Nevada 330908-12-31-10-02-00 (3300 XL NSv Position...

Código: 330908-12-31-10-02-00

Manufacturer: Bently Nevada
Product No.: 330908-12-31-10-02-00
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 150g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

Configured for high-precision shaft displacement and vibration measurement in compact mechanical spaces, the Bently Nevada 330908-12-31-10-02-00 (3300 XL NSv Position Sensor) provides direct physical/electrical execution.

Suffix Breakdown & Model Matrix

The part number 330908-12-31-10-02-00 defines the specific physical and mechanical build of the proximity probe:

330908: Base Model for 3300 XL NSv Proximity Probe
12: Unthreaded Case Length option - 12 mm
31: Overall Case Length option - 31 mm
10: Total Cable Length option - 1.0 meter
02: Connector Option - Miniature Coaxial ClickLoc connector with integrated protective armor
00: Agency Approval Option - Standard (No specialized agency approvals required)

Hardware Specifications

Parameter	Specification
Model	330908-12-31-10-02-00
Brand	Bently Nevada
Origin	USA
Weight	0.15 kg
Dimensions	12 mm unthreaded length, 31 mm overall case length
Operating Temp	-51 to 177 deg C
Power Consumption	Passive transducer element powered by connected Proximitor Sensor loop
System Series	3300 XL NSv Proximity Transducer System
Linear Range	1.0 mm (40 mils)
Probe Tip Material	Polyphenylene Sulfide (PPS)
Housing Material	AISI 303 Stainless Steel
Total Cable Length	1.0 meter
Connector Type	Miniature Coaxial ClickLoc connector

Eddy-Current Probe Scaling & Gap Voltage Validation

The 3300 XL NSv probe operates on the eddy-current sensing principle, projecting a focused electromagnetic field to detect small displacements on target shafts without physical contact. Specialized coil geometry allows accurate measurement on small-diameter target shafts without side-view interference. During field setup, gap voltage validation requires monitoring the Proximitor Sensor output and adjusting probe positioning until a nominal baseline target of -10 VDC is established. Proper radial spacing and mounting alignment prevent cross-talk suppression issues in tightly packed bearing housings.

Frequently Asked Questions

Q: How does the 3300 XL NSv probe avoid side-view interference on small shafts?

A: The probe tip coil geometry restricts the electromagnetic field spread, maintaining linear output scaling on reduced target areas and small shafts under 51 mm in diameter.

Q: What precautions should be taken with the miniature coaxial ClickLoc connector during installation?

A: Ensure the miniature coaxial ClickLoc connector fully latches into place and that the integrated protective armor is correctly positioned over the junction to shield the high-frequency signal path from mechanical strain and debris.

Field Installation Guidelines

Mechanical Mounting: Thread the AISI 303 stainless steel probe body into the mounting port, ensuring the 12 mm unthreaded length aligns with the housing clearance.
Gap Voltage Setting: Adjust the physical position of the probe tip relative to the target surface while reading the DC output voltage across the Proximitor Sensor until the -10 VDC gap voltage target is attained.
Connector Latching: Mate the miniature coaxial ClickLoc connector to the extension cable until locked, ensuring the protective armor covers the mated connection.
Cable Routing: Secure the 1.0-meter cable lead in dedicated conduit, ensuring bend radii do not exceed 25.4 mm (1.0 inch) to protect internal coaxial conductors.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.