330901-00-08-10-02-00 Bently Nevada 3300 XL NSv Datasheet

330901-00-08-10-02-00 Bently Nevada 3300 XL NSv Proximity Probes

330901-00-08-10-02-00 Bently Nevada 3300 XL NSv Proximity Probes

Availability: 10 left in stock

The Bently Nevada 330901-00-08-10-02-00, also cataloged as the 3300 XL NSv Proximity Probe, operates as a dedicated hardware component for...

SKU: 330901-00-08-10-02-00

Manufacturer: Bently Nevada
Product No.: 330901-00-08-10-02-00
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 2000g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

The Bently Nevada 330901-00-08-10-02-00, also cataloged as the 3300 XL NSv Proximity Probe, operates as a dedicated hardware component for non-contact static position and dynamic vibration measurement within fluid-film bearing machinery monitoring systems. The transducer converts mechanical clearance changes into high-frequency eddy-current impedance shifts, delivering linear voltage signals proportional to shaft displacement.

Suffix Breakdown & Model Matrix

Option Code	Parameter Designation	Configured Specification
00	Unthreaded Length Option	0.0 in
08	Overall Case Length Option	0.8 in
10	Total Length Option	1.0 meter (39 in)
02	Connector and Cable Type Option	Miniature coaxial ClickLoc connector, standard cable
00	Agency Approval Option	Not required

Hardware Specifications

Parameter	Specification
Model	330901-00-08-10-02-00
Brand	Bently Nevada
Origin	United States
Weight	Standard probe assembly weight (typically 0.2 kg class)
Dimensions	1/4-28 UNF thread case, 0.8 in case length, 1.0 meter total cable length
Operating Temp	Standard industrial probe operating range (-51 deg C to +177 deg C typical)
Power Consumption	Passive transducer element (powered via Proximitor sensor)
Scale Factor	Average scale factor of 7.87 V/mm (200 mV/mil)
Connector Type	Miniature coaxial ClickLoc connector

Eddy-Current Probe Scaling and Gap Voltage Validation

The 3300 XL NSv probe system relies on precise eddy-current probe scaling to maintain its specified 7.87 V/mm (200 mV/mil) average scale factor across small target installation areas. Gap voltage validation during bench setup requires establishing a -10 VDC baseline bias at the Proximitor sensor output under zero dynamic displacement. This voltage calibration prevents signal saturation during extreme rotor dynamics movements, maintaining linear dynamic vibration response and high cross-talk suppression between closely spaced proximity probes.

Frequently Asked Questions

Q: What is the significance of setting a -10 VDC gap voltage during installation?

A: Setting a nominal -10 VDC gap voltage places the probe tip at the midpoint of its linear physical measurement range against an AISI 4140 target.

Q: Can the 1.0 meter integral coaxial cable be cut or spliced during field wiring?

A: No. Altering the physical cable length changes total system capacitance, causing significant deviation from the factory scale factor calibration.

Field Installation Guidelines

Thread the probe body into the 1/4-28 UNF mounting port and torque to standard installation limits. Ensure a minimum of 5 full threads of engagement. Maintain sufficient radial tip clearance from surrounding metallic obstructions to prevent side-wall phantom loading. Route the standard coaxial cable through protective metal conduit, securing all ClickLoc connector joins with connector protectors and grounding the outer shielding exclusively at the driver interface cabinet to avoid earth ground loops.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.