YOKOGAWA VM1*D Multipoint Analog I/O Module
The YOKOGAWA VM1*D, also cataloged as the VM1D Interface Module, operates as a dedicated hardware component for HART-enabled analog signal acquisition and control within CENTUM VP and CS 3000 DCS platforms.
Suffix Breakdown & Model Matrix
- VM1: Base model identifier for multipoint analog I/O functionality with integrated HART communication capabilities.
- *D: Configuration suffix denoting hardware revision and support for dual-redundant deployment within system rack environments.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | VM1*D |
| Brand | YOKOGAWA |
| Origin | USA |
| Weight | 0.6 kg |
| Dimensions | 356 × 178 × 51 mm |
| Operating Temp | -10 deg C to +55 deg C |
| Power Consumption | 24 V DC |
| I/O Type | Analog (4-20 mA) / HART |
| Redundancy | Dual-redundant capable |
| Calibration | Factory/User-defined storage |
DCS Process Control & Isolation Attributes
The VM1*D executes high-precision signal processing for field instruments, integrating 16-bit analog-to-digital conversion with digital HART protocol extraction. To ensure measurement integrity, the module employs channel-to-channel isolation to prevent ground-loop interference and common-mode voltage contamination. The integrated HART loop protocol connectivity permits simultaneous analog control and digital diagnostic data logging, facilitating predictive maintenance for connected field devices. Furthermore, the module supports cold junction compensation (CJC) for temperature-based inputs, ensuring that terminal temperature fluctuations do not impact the accuracy of the signal processing chain.
Frequently Asked Questions
Q: Does the VM1*D support hot-swapping within the control station? A: Module replacement must be performed according to the specific DCS rack power-down sequence. Always verify current system status and synchronization state before physical removal to prevent backplane bus communication errors.
Q: Is the HART digital data path independent of the 4-20 mA analog signal? A: Yes. The module architecture facilitates the superposition of HART digital signals on the analog current loop, allowing for concurrent data transmission without degrading the primary control signal.
Q: How are calibration values managed during module replacement? A: The module maintains non-volatile storage for both factory calibration constants and user-defined offsets; however, verify the baseline calibration against a calibrated source after installation to ensure system precision.
Field Installation Guidelines
- Mounting: Seat the module securely into the DCS rack backplane. Tighten all retaining screws to provide a low-impedance ground bond between the module chassis and the cabinet earth.
- Wiring: Utilize shielded twisted-pair instrumentation cable for all analog signal loops. Terminate cable shields at a centralized cabinet-level grounding rail to minimize induced electromagnetic interference.
- Isolation: Maintain a minimum clearance of 150 mm between signal cabling and high-voltage AC lines to prevent inductive noise coupling.
- Thermal Management: Ensure adequate airflow within the rack environment. While the module is rated for industrial use, prevent air blockages to maintain ambient operational stability.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
PS31*A YOKOGAWA CENTUM VP Regulated Power Supply Module
$99.00
$199.00
Remote Control I/O Module YOKOGAWA RC1*A CENTUM VP
$99.00
$199.00
YOKOGAWA RS81*B CENTUM XL Micro XL Interface Card
$99.00
$199.00
Multi Status Input Interface Card YOKOGAWA ST2*D CENTUM VP
$99.00
$199.00
ST3*D YOKOGAWA CENTUM VP Multi Status Input Interface Card
$99.00
$199.00
HART-Enabled Analog I/O Module YOKOGAWA VM1*B CENTUM VP
$99.00
$199.00
YOKOGAWA VM2*D CENTUM VP HART-Enabled Analog I/O Module
$99.00
$199.00
YNT512D-Q12 YOKOGAWA CENTUM VP Bus Repeater Module
$99.00
$199.00
YOKOGAWA AAM21-S2 CENTUM CS 3000 Analog Input Module
$99.00
$199.00
AMM12T-S2 YOKOGAWA CENTUM VP Analog Input Multiplexer Module
$99.00
$199.00
YOKOGAWA F3CX04-0N FA-M3 4-Channel Pulse Input Module
$99.00
$199.00
YOKOGAWA F3AD08-4V FA-M3 8-Channel Analog Input Module
$99.00
$199.00
F3BU13-0N FA-M3 YOKOGAWA 13-Slot PLC Base Unit
$99.00
$199.00
YOKOGAWA F3LE12-0T FA-M3 Ethernet Communication Module
$99.00
$199.00
YOKOGAWA ST4*D CENTUM VP Multi Status Input Interface Card
$99.00
$199.00
YOKOGAWA F3LR02-0N FA-M3 Redundancy Interface Module
$99.00
$199.00
Power Supply Module YOKOGAWA F3PU30-0S FA-M3 Series
$99.00
$199.00
F3XC08-0C FA-M3 YOKOGAWA Digital Output Relay Module
$99.00
$199.00
YOKOGAWA F3XD16-3F FA-M3 Series Digital Input Module
$99.00
$199.00
Analog Input Output Module YOKOGAWA AAP135-S00 CENTUM VP
$99.00
$199.00
AAM11-S2 YOKOGAWA Analog Input Module Process Control
$99.00
$199.00
YOKOGAWA AAI543-S50 CENTUM VP Analog Output Module
$99.00
$199.00
F3YC08-0C YOKOGAWA FA-M3 Datasheet & Technical Manual
$99.00
$199.00
Analog Input Module YOKOGAWA AAR145-S00 CENTUM VP
$99.00
$199.00
YOKOGAWA AAR181-S00 CENTUM VP Analog Input Module
$99.00
$199.00
Analog Input Modules CENTUM VP Series YOKOGAWA ADM11-S3
$99.00
$199.00
YOKOGAWA ADV159-P00 S1 Digital Input Module
$99.00
$199.00
Yokogawa AIP571 S1 Fieldbus Interface Module
$99.00
$199.00
AIP171 S2 Yokogawa Transceiver Control Module
$99.00
$199.00
Yokogawa ADV551-P00 Digital Output Module 32-Channel
$99.00
$199.00
Yokogawa AIP571 S2 Fieldbus Interface Module
$99.00
$199.00
Ethernet Communication Module DCS Yokogawa ALE111-S01
$99.00
$199.00
Yokogawa AMM32-S3 Digital Input Module 32-Channel
$99.00
$199.00
ALU4-D Yokogawa Modular Analog Input I/O System
$99.00
$199.00
Analog Input Module for DCS Control Yokogawa AMM42-S4
$99.00
$199.00
Yokogawa AMN11-S1 Analog I/O Nest for CENTUM Systems
$99.00
$199.00
Signal Conditioner and Communication Hub Yokogawa CM1*A
$99.00
$199.00
CNB-IIA Yokogawa Communication Network Bridge Module for DCS
$99.00
$199.00
Yokogawa CP99A-A CPU Module for Field Control Stations
$99.00
$199.00
Thermocouple Input Module Yokogawa CT5-TJ*A
$99.00
$199.00
Yokogawa CTL4-B PLC Interface Module for Industrial Control
$99.00
$199.00
Yokogawa DP97-B Distributed Control System Processor Card
$99.00
$199.00
AMM12 S3 YOKOGAWA Voltage Input Multiplexer Module
$99.00
$199.00
Guide
Translation missing: en.general.search.loading