IC695ALG808 GE PACSystem RX3i Datasheet & Technical Manual

IC695ALG808 PACSystem RX3i Isolated Analog Output Module | GE Fanuc

IC695ALG808 PACSystem RX3i Isolated Analog Output Module | GE Fanuc

التوفر: 10 متوفر في المخزون

The GE IC695ALG808, also cataloged as the IC695ALG808 Isolated Analog Output Module, operates as a dedicated hardware component for multi-channel...

رمز المنتج: IC695ALG808

Manufacturer: GE Fanuc
Product No.: IC695ALG808
Product Type: Analog Output Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 310g
Shipping port: Xiamen
Warranty: 12 months

وصف التقييمات

The GE IC695ALG808, also cataloged as the IC695ALG808 Isolated Analog Output Module, operates as a dedicated hardware component for multi-channel analog signal generation and loop control execution within PACSystem RX3i platforms.

Hardware Specifications

Parameter	Specification
Model	IC695ALG808
Brand	GE Fanuc Emerson
Origin	USA / Global Manufacturing
Weight	0.31 kg (0.69 lbs)
Dimensions	Single-Slot PACSystem RX3i Module Form Factor
Operating Temp	0 to 60 deg C
Power Consumption	360 mA max at 3.3 VDC, 17 mA at 5.0 VDC (Backplane); 7.25 W max dissipation
Series	PACSystem RX3i
Product Type	Analog Output Modules
Output Channels	8 individually isolated channels
Voltage Output Ranges	0 to +10 VDC, -10 to +10 VDC
Current Output Ranges	0-20 mA, 4-20 mA
Output Resolution	15-bit (+/-10 VDC, 0-20 mA, 4-20 mA); 14-bit (0-10 VDC)
Analog Update Rate	8 ms across all eight channels
Output Settling Time	2 ms (0 to 95% full scale)
Calibrated Accuracy	+/-0.15% of full scale at 25 deg C; +/-0.25% of full scale at 60 deg C
Maximum Output Load	1350 Ohms
External Power Requirement	19.2 to 30 VDC (24 VDC nominal), 160 mA external current
Isolation Voltage	2550 VDC field-to-backplane for 1 second
Data Formats	32-bit IEEE floating point; 16-bit integer in a 32-bit field
Compatible Terminal Blocks	IC694TBB032, IC694TBB132, IC694TBS032, IC694TBS132

Backplane Bus Communication Velocity and System Integration

The IC695ALG808 processes digital logic values converted into analog output signals over the RX3i PCI backplane bus, ensuring synchronized update rates across high-density systems. High-speed backplane bus communication velocity allows all eight channel values to update within an approximate 8 ms cycle time using 32-bit IEEE floating-point or 16-bit integer data formats.

Individual channel-to-channel isolation and 2550 VDC field-to-backplane isolation prevent earth loop currents from corrupting output loop accuracy. Firmware flash compatibility supports remote software configuration of output bias, upper/lower alarm limits, and fault reporting behaviors, providing high I/O density scaling across complex process control topologies.

Frequently Asked Questions

Q: Is an external power supply required to operate the IC695ALG808 analog output channels?

A: Yes. The module requires a nominal 24 VDC (19.2 to 30 VDC range) external supply connected directly to the terminal block to drive the output loops.

Q: What output data formats are supported by the IC695ALG808 configuration software?

A: The module supports 32-bit IEEE single-precision floating point numbers as well as 16-bit signed integers placed within a 32-bit field.

Q: What is the channel isolation rating for the IC695ALG808?

A: The module provides 2550 VDC optical isolation between field-side connections and the RX3i backplane bus.

Field Installation Guidelines

Verify that system backplane power and external 24 VDC power sources are fully disconnected prior to inserting or removing the module from the rack.
Securely wire external 24 VDC field supply connections to the designated terminal block pins (IC694TBB032, IC694TBB132, IC694TBS032, or IC694TBS132) before energizing.
Use shielded twisted-pair conductors for all voltage and current output wiring, grounding the cable shield at one point only to avoid ground loops.
Ensure external load resistance on current loop channels does not exceed the maximum rating of 1350 Ohms.
Maintain unobstructed air circulation around the rack enclosure to keep ambient temperatures within the specified 0 to 60 deg C operating window.

ماذا يقول عملاؤنا عنا؟

دعم طوارئ ممتاز!

تعطل خط إنتاجنا بسبب عطل في شاشة بنتلي نيفادا. وجدناها متوفرة لدينا في المخزون، وقاموا بشحنها إلينا عبر DHL على الفور. عاد خط الإنتاج للعمل في غضون 48 ساعة - لقد أنقذت هذه الشاشة مصنعنا حقًا.

مارك تومسون

مدير الصيانة، الولايات المتحدة الأمريكية

مصدر موثوق لقطع الغيار الجديدة

يُعدّ العثور على وحدات أصلية جديدة تمامًا أمرًا بالغ الأهمية لسلامتنا. يُقدّم هذا الفريق مكونات جديدة من المصنع مع شهادات اعتماد كاملة. والتزامهم ببيع المنتجات الجديدة فقط يجعلهم شريكنا الأكثر ثقة.

روبرت هوفمان

رئيس قسم الهندسة، ألمانيا

خدمة وجودة من الدرجة الأولى

نستورد قطع غيار هانيويل وشنايدر من هنا منذ عامين. تصل كل شحنة مغلفة بإحكام مع الحفاظ على أختام المصنع الأصلية. نتميز بالتواصل الواضح وأفضل أوقات التسليم في هذا المجال.