NFDV551-P10 Yokogawa CENTUM VP Datasheet & Technical Manual

32-Ch Digital Output Module | Yokogawa NFDV551-P10 ProSafe-RS

32-Ch Digital Output Module | Yokogawa NFDV551-P10 ProSafe-RS

Availability: 20 left in stock

Yokogawa NFDV551-P10/CCC01 Digital Output Module The Yokogawa NFDV551-P10/CCC01, also cataloged as the NFDV551 Digital Output Module, operates as a dedicated...

SKU: NFDV551-P10/CCC01

Manufacturer: Yokogawa
Product No.: NFDV551-P10/CCC01
Product Type: Digital Output Modules
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 400g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Yokogawa NFDV551-P10/CCC01 Digital Output Module

The Yokogawa NFDV551-P10/CCC01, also cataloged as the NFDV551 Digital Output Module, operates as a dedicated hardware component for discrete load switching and actuator drive signaling within CENTUM VP and ProSafe-RS control networks.

Suffix Breakdown & Model Matrix

Code Suffix	Option / Configuration	Technical Description
NFDV551	Base Model	Digital Output Module for field actuator drive execution
-P	Power / Bus Type	Standard internal backplane power distribution module
1	System Variant	Single or redundant execution circuit configuration
0	Reserved / Basic	Standard structural base profile
/CCC01	Option Code	MIL connector cover assembly providing mechanical strain relief

Hardware Specifications

Parameter	Specification
Model	NFDV551-P10/CCC01
Brand	Yokogawa
Origin	Japan
Weight	0.4 kg
Dimensions	130 mm x 107.5 mm x 32.8 mm
Operating Temp	-10 deg C to 60 deg C
Power Consumption	0.3 A at 24 VDC backplane supply
Output Capacity	32 channels (current sink NPN configuration)
Rated Output Voltage	24 VDC
Operating Voltage Range	20.4 VDC to 26.4 VDC
Maximum Output Current	0.5 A per channel
On-State Voltage Drop	2 VDC maximum
Off-State Leakage Current	0.1 mA maximum
Response Time	3 ms maximum
Storage Temp	-40 deg C to 70 deg C
Operating Humidity	5% to 95% RH (non-condensing)

Isolated Process Control & Channel Isolation Profiles

The NFDV551-P10/CCC01 incorporates channel-to-channel and channel-to-ground galvanic isolation barriers to isolate discrete logic control circuits from external field surges and high-voltage transients. Integrating 32 transistor output channels into a compact footprint, the module handles current sinking operations across 24 VDC control loops while managing individual channel diagnostics. Upon detection of upstream backplane network communications failure, internal registers force channels into user-configured fallback states (HOLD, OFF, or NO). Field side connections are shielded using the /CCC01 MIL connector cover assembly, preventing cable vibration stress and securing field wiring terminations during continuous process operations.

Frequently Asked Questions

Q: How does the NFDV551-P10/CCC01 handle output states during a loss of controller backplane communication?

A: The module executes pre-programmed fallback modes (HOLD, OFF, or NO) applied via hardware register configuration to drive outputs into pre-determined safe conditions without relying on active backplane processor updates.

Q: What role does the /CCC01 suffix play in the physical installation of the module?

A: The /CCC01 option designates a MIL connector cover assembly attached to the front terminal assembly, providing mechanical strain relief and environmental shielding for high-density field wiring looms.

Q: Does the module require external field power to drive connected actuators?

A: Yes. While internal logic is powered by the 24 VDC backplane bus (drawing approximately 0.3 A), field output loops require an independent external 24 VDC field power source to drive load currents through the NPN current sinking channels.

Field Installation Guidelines

Mount the NFDV551-P10/CCC01 vertically into the appropriate slot of the Yokogawa I/O node unit, ensuring the card edge connector snaps securely into the backplane. Route all 32-channel signal conductors through the designated /CCC01 MIL connector cable strain relief housing to eliminate mechanical stress on the interface pins. Maintain a continuous protective earth ground wire routed directly from the node chassis grounding stud to the main cabinet ground bar. Ensure field wiring maintains proper polarity for current sink (NPN) operation, and confirm external 24 VDC power supply voltage remains strictly within the specified 20.4 VDC to 26.4 VDC operational window.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.