AVR10D-A22040 Yokogawa V Net Router

Duplexed V Net Router Bus Converter | Yokogawa AVR10D-A22040

Duplexed V Net Router Bus Converter | Yokogawa AVR10D-A22040

Availability: 20 left in stock

Yokogawa AVR10D Duplexed V Net Router Bus Converter Configured for cross-domain network routing and signal conversion between Vnet/IP and V...

SKU: AVR10D-A22040

Manufacturer: Yokogawa
Product No.: AVR10D-A22040
Product Type: Communication Modules
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 2300g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Yokogawa AVR10D Duplexed V Net Router Bus Converter

Configured for cross-domain network routing and signal conversion between Vnet/IP and V net or VL net platforms, the Yokogawa AVR10D-A22040 (AVR10D Duplexed V Net Router) provides direct physical/electrical execution.

Suffix Breakdown & Model Matrix

Suffix / Option Code	Option	Description
AVR10D	Base Model	Duplexed V Net Router (Bus Converter)
-A2 / -Q2	Network Interface	Dual-Redundant V net interface configuration
2	Power Redundancy	Dual-redundant power supply setup
0	Fixed Code	Always 0
2 / 4	Power Supply Voltage	220 V AC to 240 V AC line input voltage
0 / 0	Protection Level	Basic type with no explosion protection

Hardware Specifications

Parameter	Specification
Model	AVR10D-A22040
Brand	Yokogawa
Origin	Japan
Weight	2.3 kg to 5.8 kg (variant dependent)
Dimensions	Standard 19-inch rack mount chassis (4U)
Operating Temp	0 deg C to 50 deg C
Power Consumption	80 VA to 110 VA
Power Supply Input	220 V AC to 240 V AC (50/60 Hz, dual-redundant)
Vnet/IP Interface	100 Mbps full duplex, RJ45 (100Base-TX), UTP CAT5e+ cable
V net / VL net Interface	10 Mbps coaxial cable, BNC connectors (dual-redundant or single)
System Compatibility	Yokogawa CENTUM VP, CENTUM CS 3000, CENTUM CS 1000
Mounting Format	19-inch rack cabinet mounting (4 x M5 panel screws)

4-20 mA HART Loop Protocol and Channel Isolation

The AVR10D-A22040 router routes high-speed Ethernet communication traffic from Vnet/IP HIS operator stations to proprietary V net and VL net control buses. Physical channel-to-channel isolation and optical galvanic barriers prevent high-frequency noise or differential ground transients on coaxial cable networks from propagating to the host system CPU backplane. The dual-redundant bus interface continuously converts field station status data and 4-20 mA HART loop protocol parameters between IP-based network structures and legacy token-passing bus topologies.

Frequently Asked Questions

Q: How does the dual-redundant power supply operate during a power phase disruption?

A: The chassis contains two internal power supply units connected to independent AC input terminals. If one 220-240 V AC supply line drops out, the secondary supply carries the total internal bus load without interruption to network communication routing.

Q: Can network communication modules inside the AVR10D chassis be replaced while the system is online?

A: Online module replacement is supported provided field engineers follow hot-swap procedures and verify that network traffic has successfully failed over to the redundant V net or Vnet/IP communication channel.

Field Installation Guidelines

Mount the AVR10D-A22040 chassis into a 19-inch control rack using four M5 screws. Tighten screws evenly to maintain physical grounding against enclosure frame rails and prevent mechanical strain under vibration.

Connect the dual 220-240 V AC power feeds to separate primary and secondary circuit breakers. Route Vnet/IP CAT5e+ Ethernet lines and coaxial V net BNC cables in separate cable trays to eliminate cross-talk noise, and clamp coaxial cable shields directly to the cabinet ground bus bar.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.