The GE IS220PVIBH1AL is a high-performance Vibration Monitor I/O Pack designed for the Mark VIe control system. As a revised version of the IS220PVIBH1, this module incorporates updated hardware to provide reliable signal acquisition and processing for critical rotating machinery in power generation and industrial applications.
Features
- Thirteen-channel vibration and proximity signal acquisition.
- Dual independent 10/100 Mbps Ethernet ports for IONet communication and network redundancy.
- Sensor-channel specificity for optimized signal processing of accelerometers, Velomitors, seismic sensors, and Proximitors.
- Support for both Simplex and Triple Modular Redundant (TMR) configurations.
- Integrated hardware reset circuit and watchdog timer for system reliability.
- Internal sensor monitoring for temperature and diagnostic health.
Applications
- Gas and Steam Power Plants: Monitoring turbine vibration to prevent failure during load transients.
- Hydroelectric Power Generation: Managing turbine speed and generator grid synchronization.
- Industrial Cogeneration Facilities: Providing high-availability monitoring for backup steam turbines.
- Hazardous Environment Applications: Designed for operation in extreme temperature ranges with high electrical isolation.
Technical Specifications
| Product Model | IS220PVIBH1AL |
| Manufacturer | General Electric |
| Operating Temperature | -40 degC to +70 degC |
| Humidity | 5-95% RH (non-condensing) |
| Vibration Resistance | 5g (10-500Hz) |
| Probe Excitation Voltage | -24 VDC |
| Probe Current Limit | 12 mA per transducer |
| CMRR (50/60 Hz) | -50 dB |
Installation Guidelines
- Handling: Use standard ESD precautions when handling the module to prevent damage to internal circuitry.
- Simplex Configuration: Plug the PVIB pack directly into the DC-37 pin connector on the compatible terminal board.
- TMR Configuration: Install three PVIB I/O packs into their corresponding connectors for redundant operation.
- Mechanical Securing: Lock the packs into the mounting bracket using the threaded studs located adjacent to the Ethernet ports.
- Alignment: Adjust the bracket position to ensure no lateral force is applied to the DC-37 connector; this alignment is typically performed once during initial installation.
- Power: Always ensure the system is powered down before inserting or removing the I/O pack from the rack.
FAQ
Does it support network redundancy?
Yes. The module is equipped with dual, fully independent 10/100 Mbps Ethernet ports for network redundancy on the IONet. If one connection fails, communication is automatically maintained through the other.
What terminal boards are compatible?
It is specifically designed to interface with the GE TVBA vibration terminal board.
Are there channel-specific sensor restrictions?
Yes. Channels 1–3 support accelerometers, Proximitors, Velomitors, and seismic sensors. Channels 9–12 are reserved exclusively for Proximitor sensors. Channel 13 is dedicated to reading a Keyphasor or proximity-type pulse signal.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
GE IS200EDCFG1A Exciter DC Feedback Board
$99.00
$199.00
General Electric IS220PSVOH1A Mark VIe Servo Control Module
$99.00
$199.00
General Electric IS220PDOAH1B Mark VIe Digital Output Module
$99.00
$199.00
General Electric IS200TDBTH2ACD Mark VIe PDIO Terminal Board
$99.00
$199.00
GE Fanuc DS200ADPBG1A Genius I/O Adapter Board
$99.00
$199.00
GE Fanuc IS200VSVOH1B Mark VI Servo Control Board
$99.00
$199.00
GE DS3800DMPK1E1D Mark IV General Regulator Board
$99.00
$199.00
DS200FCGDH1B GE Mark VI Gate Distribution and Status Card
$99.00
$199.00
GE DS200LRPAG1A Speedtronic Mark V Line Protection Card
$99.00
$199.00
GE DS200TCCBG8B Mark V LM Common Extended Analog I/O Board
$99.00
$199.00
DS200TBCAG1A GE Mark V RTD Termination Module
$99.00
$199.00
GE DS200UPLAG1B Mark V LAN Power Supply Card
$99.00
$199.00
DS2020EXPSG3 EX2000 Exciter Power Supply Board | GE
$99.00
$199.00
DS200CPCAG1A | GE | EX2000 Contactor Pilot Board
$99.00
$199.00
GE Fanuc DS200SHVMG1A Mark V High Voltage Interface Board
$99.00
$199.00
GE DS200TCRAG1A Relay Output Board | Mark V LM
$99.00
$199.00
GE DS200FGPAG1A LS2100 Gate Pulse Amplifier Board
$99.00
$199.00
GE DS200TCQAG1A Mark V Analog I/O Board
$99.00
$199.00
DS200TCEAG1B GE Mark V Emergency Overspeed Board
$99.00
$199.00
GE DS200SLCCG3A Mark V & EX2000 LAN Communication Card
$99.00
$199.00
GE DS200TCQCG1A Mark V RST Overflow Board
$99.00
$199.00
DS200TCEBG1A GE Mark V Protective Termination Expander Board
$99.00
$199.00
GE DS200TCEAG1A Mark V Emergency Overspeed Board
$99.00
$199.00
Mark V | GE DS200TCCAG1A Common Analog I/O Board
$99.00
$199.00
DS200TCCBG3B GE Mark V Extended Analog I/O Board
$99.00
$199.00
GE DS200DDTBG2A LS2100 Auxiliary I/O Terminal Board
$99.00
$199.00
General Electric DS200DSPCH1A Turbine Control LCI Card
$99.00
$199.00
GE Fanuc DS200SDCIG2AFB DC Power Supply Board
$99.00
$199.00
General Electric DS200TCQAG1BFD RST Analog I/O Board
$99.00
$199.00
GE DS3800NPSE1E1G Mark IV Speedtronic Power Supply Board
$99.00
$199.00
GE DS200ADMAH1A Analog-to-Digital Module
$99.00
$199.00
DS200TCDAG1A GE Digital I/O Board
$99.00
$199.00
GE DS200SDCCG5A Drive Control Card
$99.00
$199.00
DS200SDCIG1A DC Power Supply and Instrumentation Board | GE
$99.00
$199.00
GE DS200XDSAG1A Mark V Fuel Pressure Management Board
$99.00
$199.00
GE DS200EXDEG1A Mark V De-Excitation Control Board
$99.00
$199.00
DS200TBQAG1A GE Mark V RST Terminal Board
$99.00
$199.00
GE DS200QTBAG1A Mark V RST Termination Board
$99.00
$199.00
GE DS200PCCAG6A Mark V Power Connect Board
$99.00
$199.00
DS200LPPAG1A GE Mark V Line Protection Card
$99.00
$199.00
GE DS200DTBAG1A Mark V LM Digital Contact Terminal Board
$99.00
$199.00
Guide
Translation missing: en.general.search.loading