Configured for high-speed deterministic bus communications in ProSafe-RS safety instrumented systems, the Yokogawa SEC401-51 (SEC401 ESB Bus Coupler Module) provides direct physical/electrical execution.
| Code | Option / Specification | Description |
|---|---|---|
| SEC401 | Base Model | ESB Bus Coupler Module |
| -5 | Protection Type | Standard type with no explosion protection |
| 1 | Environmental Coating | With ISA Standard G3 conformal coating |
| Parameter | Specification |
|---|---|
| Model | SEC401-51 |
| Brand | Yokogawa |
| Origin | Japan |
| Weight | 0.24 kg (Net), 1.5 kg (Shipping) |
| Dimensions | Standard rack-mounted module enclosure |
| Operating Temp | -20 to +70 deg C |
| Power Consumption | 0.5 A (Current Consumption) |
| Functional Type | ESB Bus Coupler Module / Safety Node Controller |
| Transmission Speed | 128 Mbps (I/O module data transmission) |
| Transmission Distance | 10 m maximum |
| Connectable Node Units | 9 units maximum |
| Environmental Protection | ISA Standard G3 conformal coating |
| Isolation | Optical isolation via ESB bus |
| Safety Integrity Level | SIL3 (IEC 61508 Certified) |
The SEC401-51 coupler module connects safety node units over the ESB bus, transferring high-speed process data at 128 Mbps across 10 m spans. The card preserves channel-to-channel isolation to isolate control logic from field-induced electrical transients. Dedicated circuitry integrates seamlessly with 4-20 mA HART loops and FOUNDATION Fieldbus field instruments, maintaining deterministic cycle times and SIL3 safety loop execution under continuous operation.
Q: How many safety node units can a single SEC401-51 bus coupler support?
A: The SEC401-51 module supports inter-node communication for up to 9 connected safety node units maximum over the ESB bus interface.
Q: What environmental protection standard applies to the SEC401-51 module?
A: The unit features factory-applied ISA Standard G3 conformal coating to protect internal electronic circuits against corrosive industrial atmospheres.
Insert the SEC401-51 vertically into the designated slot of the main safety node unit chassis, pushing firmly until backplane bus pins seat fully. Fasten the top and bottom retaining screws to establish chassis ground continuity. Verify that total ESB bus cable runs do not exceed the maximum allowable distance of 10 m. Route communication cabling through dedicated low-voltage instrument ducts separate from AC power conduits to maintain signal clarity.
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.