YNT512D-V12/KT Yokogawa Bus Repeater

Yokogawa YNT512D-V12/KT CENTUM VP Vnet/IP Communication Interface Module

Yokogawa YNT512D-V12/KT CENTUM VP Vnet/IP Communication Interface Module

Availability: 99 left in stock

Yokogawa YNT512D-V12/KT V Net Bus Repeater The Yokogawa YNT512D-V12/KT, also cataloged as the Yokogawa YNT512D-V12 V Net Bus Repeater, operates...

SKU: YNT512D-V12

Manufacturer: Yokogawa
Product No.: YNT512D-V12
Product Type: Communication Modules
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 5000g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Yokogawa YNT512D-V12/KT V Net Bus Repeater

The Yokogawa YNT512D-V12/KT, also cataloged as the Yokogawa YNT512D-V12 V Net Bus Repeater, operates as a dedicated hardware component for signal amplification and network regeneration within Yokogawa V Net and Vnet/IP distributed control network platforms. It processes and rebuilds degraded communication packages directly at the physical layer to maintain signal integrity between distributed control nodes.

Hardware Specifications

Parameter	Specification
Model	YNT512D-V12/KT (including YNT512D-V12 base configuration)
Brand	Yokogawa
Origin	Japan
Weight	5.0 kg (repeater unit with housing assemblies) / 0.35 kg (internal module variant)
Dimensions	144 mm x 144 mm x 72 mm (standard assembly) / 130 mm x 28 mm x 130 mm (module option)
Operating Temp	0 to 55 deg C
Power Consumption	100-240 VAC, 50/60 Hz or 24 VDC +/-5% (up to 1500 mA load) / 5 VDC +/-5% (0.5 A current draw)
Signal Channels	2 independent communication lines
Transmission Protocol	Yokogawa V Net / Vnet/IP proprietary system
Hardware Interface	2 x RJ45 Ethernet ports / RS-232C configuration port
Communication Speed	100 Mbps full-duplex transmission rate
Isolation Capacity	Optical and electrical isolation barriers between backplane and interface circuits

Process Control & DCS Diagnostics

The hardware features dual-port physical redundancy configured specifically for high-availability distributed control environments. It implements a dedicated 4-20 mA HART loop protocol channel pass-through option alongside built-in watchdog circuits that continuously monitor network timing anomalies. Channel-to-channel isolation safeguards the primary control bus by dampening electrical transients, ensuring that errors remain localized and do not propagate across adjacent nodes on the network backbone.

Frequently Asked Questions

Q: What action occurs if the module detects an internal watchdog timing fault?

A: The internal hardware watchdog forces the module to trip an error indicator light, immediately isolating the degraded channel to protect system bus operations while transferring communications entirely over the redundant alternate network link.

Q: How do technical personnel configure the diagnostics system on the module?

A: Technicians use the built-in RS-232C serial interface port to connect a terminal tool, which allows them to verify signal attenuation levels, check diagnostic logs, and update internal parameter matrices directly.

Field Installation Guidelines

Mount the unit securely on standard industrial DIN rails or direct rack frames, ensuring that all physical mounting clips engage fully to resist vibrational displacement.
Ground the module via a low-impedance copper conductor connected to the dedicated industrial safety earth terminal, keeping the run as short as possible.
Terminate all copper communication links within standard 100 m physical segment lengths, and route the network cabling through isolated wireways separate from high-voltage AC lines to minimize electromagnetic interference.
Maintain a minimum 50 mm clearance perimeter around the chassis ventilation pathways to permit natural thermal convection currents during full-load operations.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.