TE32*B Yokogawa CENTUM Datasheet & Technical Manual

TE32*B Yokogawa CENTUM CS3000 Terminal Board Modules

TE32*B Yokogawa CENTUM CS3000 Terminal Board Modules

التوفر: 20 متوفر في المخزون

Yokogawa TE32*B CENTUM Terminal Board Module The Yokogawa TE32*B, also cataloged as the TE32 Terminal Board Module, operates as a...

رمز المنتج: TE32*B

Manufacturer: Yokogawa
Product No.: TE32*B
Product Type: Terminal Blocks
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 1200g
Shipping port: Xiamen
Warranty: 12 months

وصف التقييمات

Yokogawa TE32*B CENTUM Terminal Board Module

The Yokogawa TE32*B, also cataloged as the TE32 Terminal Board Module, operates as a dedicated hardware component for 32-point field signal distribution and cable termination within Yokogawa CENTUM platforms.

Hardware Specifications

Parameter	Specification
Model	TE32*B
Brand	Yokogawa
Origin	Japan
Weight	1.2 kg (Base unit) / 3.0 kg (Shipping)
Dimensions	Standard terminal board footprint
Operating Temp	0 to +50 deg C
Power Consumption	5 VDC backplane bus power (passive termination)
Channel Capacity	32 contact points
Terminal Type	M4 screw terminals
Dielectric Strength	500 VAC for 1 minute
Insulation Resistance	100 M ohm minimum at 500 VDC
Operating Humidity	5 to 90 %RH (non-condensing)
Revision Style	Style B (*B)

4-20 mA HART Loop Protocol and CJC Capabilities

The terminal board routes incoming sensor wiring and field control signals directly to system I/O cards via dedicated multi-core KS series cables. The hardware design preserves signal purity during 4-20 mA HART loop protocol transmission by establishing low-resistance physical terminations across all 32 contact points. When paired with high-density temperature interface modules, the assembly maintains galvanic isolation between individual signal paths and chassis earth, preventing common-mode voltage spikes from skewing cold junction compensation (CJC) calculations.

Frequently Asked Questions

Q: What screw torque specification should be applied to the M4 field wiring terminals?

A: Tighten M4 screw terminals to a nominal torque of 1.2 N m using a calibrated screwdriver. Over-tightening can strip internal threads, whereas under-tightening causes high electrical contact resistance and intermittent signal loss.

Q: How does the Style B revision improve noise immunity compared to earlier iterations?

A: Style B terminal boards feature upgraded dielectric insulation materials that deliver 500 VAC withstand voltage and a minimum of 100 M ohm insulation resistance at 500 VDC, preventing cross-channel leakage current in high-density control cabinets.

Field Installation Guidelines

Mount the terminal board vertically onto the cabinet mounting plate using standard M5 chassis hardware. Strip field wires to the recommended length and crimp M4 spade or ring lugs onto each conductor prior to insertion. Secure all 32 wiring connections firmly onto the M4 screw terminals, verifying that no stray wire strands extend past the terminal insulation barriers. Connect the dedicated KS series interface cable between the terminal board connector header and the corresponding system I/O module slot, ensuring the connector latches click into place. Route field cables in separate wire ducts away from high-voltage AC power lines to avoid inductive noise coupling.

ماذا يقول عملاؤنا عنا؟

دعم طوارئ ممتاز!

تعطل خط إنتاجنا بسبب عطل في شاشة بنتلي نيفادا. وجدناها متوفرة لدينا في المخزون، وقاموا بشحنها إلينا عبر DHL على الفور. عاد خط الإنتاج للعمل في غضون 48 ساعة - لقد أنقذت هذه الشاشة مصنعنا حقًا.

مارك تومسون

مدير الصيانة، الولايات المتحدة الأمريكية

مصدر موثوق لقطع الغيار الجديدة

يُعدّ العثور على وحدات أصلية جديدة تمامًا أمرًا بالغ الأهمية لسلامتنا. يُقدّم هذا الفريق مكونات جديدة من المصنع مع شهادات اعتماد كاملة. والتزامهم ببيع المنتجات الجديدة فقط يجعلهم شريكنا الأكثر ثقة.

روبرت هوفمان

رئيس قسم الهندسة، ألمانيا

خدمة وجودة من الدرجة الأولى

نستورد قطع غيار هانيويل وشنايدر من هنا منذ عامين. تصل كل شحنة مغلفة بإحكام مع الحفاظ على أختام المصنع الأصلية. نتميز بالتواصل الواضح وأفضل أوقات التسليم في هذا المجال.