TC-IAH161 Honeywell Experion PKS 4-20mA Input Module

Availability: 99 left in stock

Product Overview The Honeywell TC-IAH161 functions as a high-density, 16-channel data acquisition interface specifically engineered for the Experion PKS and...

SKU: TC-IAH161

Manufacturer: Honeywell
Product No.: TC-IAH161
Product Type: High-Density Data Acquisition
Product Origin: USA
Payment:T/T, Western Union
Weight: 400g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Product Overview

The Honeywell TC-IAH161 functions as a high-density, 16-channel data acquisition interface specifically engineered for the Experion PKS and PlantCruise Series C hardware platforms. This 100% Brand New and Original module bridges field-level signals from 4–20 mA and 0–10 V transmitters to the Distributed Control System (DCS). Each channel utilizes a dedicated 16-bit analog-to-digital converter, providing the extreme granularity required for precise process monitoring. By integrating hardware-level signal conditioning and robust RFI immunity, the TC-IAH161 maintains measurement integrity in the electrically noisy environments typical of power generation, chemical processing, and oil refining facilities.

Technical Specifications

Parameter	Specification Details
Manufacturer	Honeywell
Model Number	TC-IAH161
Hardware Series	Experion PKS Series C
Input Count	16 High-Level Channels (Single-ended)
A/D Resolution	16-bit across all ranges
Update Rate	250 ms Deterministic Data Publishing
Voltage Ranges	±10.25 VDC, 0–10.25 VDC, 0–5.125 VDC
Current Range	0–20.5 mA (via internal 249 Ohm resistor)
Input Impedance	> 1.0 MOhm (Voltage) / 249 Ohm (Current)
Galvanic Isolation	2550 VDC for 1 second (User-to-System)
Frequency Response	20 Hz (-3 dB bandwidth)
Power Dissipation	4.1 W Maximum
Required Termination	TC-TBCH 36-position terminal block

导出到 Google 表格

Engineering Advantages

High-Fidelity Signal Conversion: The 16-bit A/D resolution ensures that the DCS captures minute process fluctuations. This precision proves vital for sophisticated PID control loops where accurate feedback for pressure, flow, and temperature directly impacts product quality and system safety.
Deterministic Data Publishing: The module publishes updated process data every 250 ms. This consistent refresh rate eliminates variable "jitter" in control strategies, allowing the Series C controller to execute logic based on real-time field conditions without computational lag.
Aggressive Noise Rejection: Honeywell equips each channel with a 20 Hz low-pass filter. This architecture suppresses high-frequency interference from variable frequency drives (VFDs) and heavy switching gear, ensuring that only valid process data reaches the control logic.
Robust Hardware Protection: A 2550 VDC galvanic isolation barrier shields the sensitive internal I/O Link and backplane from field-side surges and ground loops. This protection extends the MTBF (Mean Time Between Failures) of the entire I/O chassis by preventing external transients from migrating to the controller core.
Streamlined Current Sensing: The internal 249 Ohm precision resistor allows for direct 4–20 mA current loop interfacing. This eliminates the need for external shunt resistors on the terminal block, significantly reducing the complexity of cabinet wiring and potential points of failure.

FAQs

Can I mix voltage and current signals on the same TC-IAH161 module?

Yes. You can configure individual channels for different voltage ranges or current inputs through the Experion PKS Configuration Studio. However, ensure that the field wiring and termination accurately reflect the software settings.

Is the TC-IAH161 compatible with HART field devices?

The TC-IAH161 is a high-level analog input module focused on 4-20mA/0-10V precision. For full HART digital diagnostic capabilities, you should utilize a HART-enabled module like the TC-HAI161.

Does the module require a specific I/O Termination Assembly (IOTA)?

The TC-IAH161 installs into a standard Series C I/O chassis and requires the TC-TBCH 36-position terminal block for field wiring. Always verify that the IOTA matches the chassis slot configuration before installation.

How does the module handle a 24VDC short circuit on the input?

While the module features robust isolation and RFI protection, a direct 24VDC short to a current-configured input can stress the internal 249 Ohm resistor. We recommend following standard Honeywell fuse and current-limiting guidelines for all field-side loops.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.