100% Genuine. 100,000+ Parts in Stock. Ready to Ship.

  • en

Yokogawa ANT401-50 Optical ESB Bus Repeater Master Module

The Yokogawa ANT401-50, also cataloged as the ANT401 Optical ESB Bus Repeater Master Module, operates as a dedicated hardware component for converting electrical ESB bus signals into optical signals within CENTUM VP, CS 3000, and ProSafe-RS control networks.

Hardware Specifications

Parameter Specification
Model ANT401-50 (Style S1)
Brand Yokogawa Electric Corporation
Origin Singapore
Weight 0.25 kg
Dimensions 22 x 124 x 126 mm
Operating Temp -20 deg C to +70 deg C
Power Consumption 0.5 A (from 5 VDC chassis supply)
Transmission Medium Optical fiber cable
Maximum Distance 5 km per stage (10 km maximum in dual-stage extension)
Topology Star or chain configurations
Compatible Units ANB10D, AFF50D, ANT10U, ANT502-50
Isolation Galvanic isolation between electrical ESB and optical interfaces

Fieldbus Connectivity & Channel-to-Channel Isolation

The ANT401-50 master module converts high-speed electrical ESB signals into modulated optical pulses to extend communication distances between local control units and remote I/O nodes. By transmitting control traffic over fiber optic links, the module provides complete electrical channel-to-channel isolation, suppressing common-mode noise, ground loops, and high-voltage surges. Integrated diagnostic circuits track link power attenuation margins, reporting real-time signal health status directly to the host control system software.

Frequently Asked Questions

Q: Can the ANT401-50 module be replaced online while the control system is active?

A: Yes, the module supports online hot-swapping inside standard Yokogawa node units. Replacing the card does not interrupt backplane power or cause data frame corruption on adjacent running modules.

Q: What is the maximum fiber link distance supported between an ANT401-50 master and an ANT502-50 slave?

A: A single optical stage supports transmission distances up to 5 km over multi-mode or single-mode fiber infrastructure. Connecting two stages in series allows system architects to extend the total bus distance up to 10 km.

Field Installation Guidelines

Insert the ANT401-50 into the dedicated slot of the field control unit or node unit, securing the top and bottom thumbscrews to ensure frame ground continuity. Connect fiber optic cables using clean LC-type connectors, observing minimum bend radius specifications to avoid micro-bending signal losses. Attach the ESB bus connector unit (such as the CU1N option) firmly to the front interface, and torque all cable retention screws to prevent vibration-induced loosening. Keep fiber ports capped with dust covers until final cable termination to prevent optical transceiver contamination.

What's clients say about us

Translation missing: en.general.search.loading