The Bently Nevada 330104-00-03-50-02-00, also cataloged as the 330104 Proximity Sensors, operates as a dedicated hardware component for high-frequency eddy-current displacement sensing within 3300 XL Transducer Systems. It routes dynamic radio frequency fields to monitor static shaft position and relative vibration amplitudes across rotating machinery protection loops.
Suffix Breakdown & Model Matrix
| Option Code | Designation | Parameter Value / Option Description |
|---|---|---|
| 330104 | Base Model | 3300 XL 8 mm Proximity Probe, M10 x 1 thread, with armor |
| -00 | Unthreaded Length Option | 0 mm |
| -03 | Overall Case Length Option | 30 mm |
| -50 | Total Length Option | 5.0 meters (16.4 feet) |
| -02 | Connector and Cable Type Option | Miniature coaxial ClickLoc connector, standard cable |
| -00 | Agency Approval Option | Not required |
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 330104-00-03-50-02-00 |
| Base Model | 330104 |
| Brand | Bently Nevada |
| Series | 3300 XL 8 mm |
| Product Type | Proximity Sensors |
| Origin | USA |
| Case Geometry & Threading | M10 x 1 thread, 30 mm overall case length, 0 mm unthreaded length |
| Protection Armor | Flexible armor flexible sleeving included |
| Total Cable Length | 5.0 meters (16.4 feet) |
| Connector Type | Miniature coaxial ClickLoc connector |
| Agency Approval Option | Unapproved / Not required (-00 option) |
| Operating Temp | -51 to +177 deg C (Standard 3300 XL temperature threshold) |
| Power Consumption | Passive physical component (0 W) |
| Dimensions | 8 mm probe tip diameter, 30 mm case length |
| Weight | 0.323 kg (Net Weight) / 1.5 kg (Shipping Weight) |
Eddy-Current Probe Scaling & Rotor Dynamics
The 330104-00-03-50-02-00 probe generates a radio frequency magnetic field via an 8 mm tip coil to sense physical distance relative to conductive target surfaces. Controlled internal capacitance maintains strict eddy-current probe scaling at a standard 7.87 V/mm (200 mV/mil) sensitivity when tied to a matched 5.0-meter 3300 XL Proximitor sensor. Proper mechanical positioning provides gap voltage validation targeting -10 VDC at nominal center-gap settings, ensuring optimal cross-talk suppression and accurate measurement of dynamic rotor dynamics.
Frequently Asked Questions
Q: Why is gap voltage validation targeting -10 VDC necessary during installation?
A: Setting the probe gap to produce -10 VDC at the Proximitor output places the sensor at the midpoint of its linear voltage range, maximizing dynamic vibration headroom in both directions.
Q: How does the ClickLoc connector option (-02) ensure mechanical locking?
A: The ClickLoc miniature coaxial connector incorporates a friction detent collar that snaps over the female connector interface, preventing rotational back-off caused by machinery vibration.
Q: Can the 5.0-meter cable option (-50) be shortened in the field?
A: No, cutting or altering the 5.0-meter cable changes system capacitance and inductance, corrupting the eddy-current calibration scale factor and invalidating output accuracy.
Field Installation Guidelines
- Inspect the M10 x 1 threaded mounting bore for debris, thread damage, or metal shavings prior to inserting the probe assembly.
- Screw the probe into the threaded mounting bracket by hand until the tip approaches the target shaft face.
- Wire the probe lead to the matching 3300 XL Proximitor sensor and monitor output voltage using a calibrated multimeter. Adjust insertion depth until reaching the -10 VDC baseline gap voltage target.
- Tighten the probe locknut against the bracket face to lock the mechanical position without twisting the armored cable body.
- Secure the ClickLoc coaxial connector to the Proximitor input interface and slide an insulating connector protector boot over the junction to eliminate ground loops.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
Bently Nevada 330100-50-03 3300 Proximitor Sensor
$99.00
$199.00
330901-00-40-05-02-05 Bently Nevada 3300 NSv Proximity Probe
$99.00
$199.00
Bently Nevada 330930-065-02-00 3300 NSv Extension Cable
$99.00
$199.00
330930-065-01-05 3300 NSv Extension Cable | Bently Nevada
$99.00
$199.00
330930-065-00-CN 3300 NSv Extension Cable | Bently Nevada
$99.00
$199.00
330930-045-03-CN Bently Nevada 3300 NSv Extension Cable
$99.00
$199.00
Bently Nevada 330930-045-00-CN 3300 NSv Extension Cable
$99.00
$199.00
330930-040-02-00 3300 XL Extension Cable | Bently Nevada
$99.00
$199.00
Bently Nevada 330910-07-23-10-02-00 3300 NSv Proximity Probe
$99.00
$199.00
Bently Nevada 330910-00-05-10-02-00 3300 NSv Proximity Probe
$99.00
$199.00
Bently Nevada 330909-00-60-10-02-00 3300 NSv Proximity Probe
$99.00
$199.00
330905-12-22-05-02-05 Bently Nevada 3300 NSv Proximity Probe
$99.00
$199.00
Bently Nevada 330905-07-17-05-02-05 3300 NSv Proximity Probe
$99.00
$199.00
Guide
Translation missing: en.general.search.loading