330103-00-03-10-01-05 Bently Nevada Proximity Probe

Bently Nevada 330103-00-03-10-01-05 3300 XL 8 mm Proximity Probes

Bently Nevada 330103-00-03-10-01-05 3300 XL 8 mm Proximity Probes

Availability: 10 left in stock

The Bently Nevada 330103-00-03-10-01-05, also cataloged as the 330103 Proximity Sensors, operates as a dedicated hardware component for dynamic shaft...

SKU: 330103-00-03-10-01-05

Manufacturer: Bently Nevada
Product No.: 330103-00-03-10-01-05
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 1500g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

The Bently Nevada 330103-00-03-10-01-05, also cataloged as the 330103 Proximity Sensors, operates as a dedicated hardware component for dynamic shaft displacement and relative vibration measurements within 3300 XL Transducer System platforms. It projects a high-frequency radio frequency field from its 8 mm polyphenylene sulfide tip to capture non-contact physical position changes.

Suffix Breakdown & Model Matrix

Option Code	Designation	Parameter Value / Option Description
330103	Base Model	3300 XL 8 mm Proximity Probe, 3/8-24 UNF thread
-00	Unthreaded Length Option	0 mm
-03	Overall Case Length Option	30 mm
-10	Total Length Option	1.0 meter (3.3 feet)
-01	Connector and Cable Type Option	Miniature coaxial ClickLoc connector with connector protector, standard cable
-05	Agency Approval Option	CSA, ATEX, IECEx Approvals

Hardware Specifications

Parameter	Specification
Model	330103-00-03-10-01-05
Base Model	330103
Brand	Bently Nevada
Series	3300 XL 8 mm
Product Type	Proximity Sensors
Origin	USA
Case Geometry & Threading	3/8-24 UNF thread, 30 mm overall case length, 0 mm unthreaded length
Probe Case Material	AISI 303 or 304 stainless steel (SST)
Probe Tip Material	Polyphenylene sulfide (PPS)
Cable & Connector Configuration	Miniature coaxial ClickLoc connector with connector protector, standard cable
Total Cable Length	1.0 meter (3.3 feet)
Agency Approvals	CSA, ATEX, IECEx Approvals (-05 option)
Operating Temp	-51 to +177 deg C (Standard probe operating envelope)
Power Consumption	Passive physical component (0 W)
Dimensions	Standard 8 mm probe tip diameter, 30 mm case length
Weight	1.5 kg (Shipping Weight)

Eddy-Current Probe Scaling & Rotor Dynamics

The 330103-00-03-10-01-05 probe establishes a high-frequency electromagnetic field to sense small-gap dimensional variations against target metallic shaft surfaces. When combined with an extension cable and 3300 XL Proximitor sensor configured for a matched total system length, the assembly yields accurate eddy-current probe scaling at a linear 7.87 V/mm (200 mV/mil). During mounting, real-time gap voltage validation targeting -10 VDC verifies nominal electrical midpoint positioning, ensuring cross-talk suppression and accurate tracking of dynamic rotor dynamics.

Frequently Asked Questions

Q: What function does the factory connector protector (-01 option) serve during installation?

A: The connector protector encapsulates the miniature coaxial ClickLoc junction, sealing out moisture, conductive dust, and oil while preventing electrical contact between the cable shield and machine ground potential.

Q: Why does option -00 feature 0 mm unthreaded length?

A: Option -00 provides full threading along the entire 30 mm case length, permitting complete thread engagement in thin mounting plates or tapped bearing housings.

Q: Can the 1.0-meter probe cable (-10 option) be connected directly to a Proximitor sensor without an extension cable?

A: Only if the Proximitor sensor is specifically calibrated for a 1.0-meter total system length; otherwise, it must be paired with an extension cable (e.g., a 4.0-meter cable) to match a 5.0-meter or 9.0-meter Proximitor calibration curve.

Field Installation Guidelines

Clean the 3/8-24 UNF threaded mounting bore and check for thread burrs prior to inserting the probe body.
Thread the 30 mm probe into the housing by hand until the tip nears the target surface. Connect the cable to a calibrated Proximitor sensor and monitor voltage output.
Adjust insertion depth until reaching the target -10 VDC gap voltage baseline at physical shaft center position.
Tighten the mounting locknut against the bracket surface to lock the probe position without applying twisting strain to the integral lead cable exit.
Snap the ClickLoc miniature coaxial connector into the extension cable interface and push the integrated connector protector securely over the join to ensure electrical isolation.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.