Configured for simultaneous analog signal processing and current output generation in VersaMax system platforms, the GE Fanuc IC200ALG430 (IC200ALG430 Analog Combination Module) provides direct physical/electrical execution. The module integrates 4 differential 4-20 mA input channels and 2 single-ended 4-20 mA current outputs, converting signals with 12-bit digital resolution across all channels.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC200ALG430 |
| Brand | GE Fanuc |
| Origin | USA |
| Weight | 0.38 lbs (0.17 kg) |
| Dimensions | Single-slot VersaMax module footprint |
| Operating Temp | 0 deg C to 60 deg C |
| Power Consumption | 50 mA at 5 VDC (backplane bus); 215 mA max plus load currents (external) |
| Analog Inputs | 4 differential channels (4-20 mA) |
| Analog Outputs | 2 single-ended channels (4-20 mA) |
| Resolution | 12-bit (inputs and outputs) |
| Input Update Rate | 0.4 ms maximum |
| Output Update Rate | 0.3 ms maximum |
| Input Filter Response Time | 5.0 ms |
| External Power Supply | +18 to +30 VDC or 9.6 to 15 VDC (required for output circuits) |
| Isolation | 250 VAC continuous, 1500 VAC for 1 minute (optical) |
| Crosstalk Rejection | 30 dB minimum channel-to-channel |
| Status Indicators | 2 LEDs (FLD POWER, MODULE OK) |
Backplane Bus Communication Velocity & Firmware Flash Compatibility
The module transmits 4 words of input data and receives 2 words of output data across the VersaMax backplane bus, drawing 50 mA maximum at 5 VDC logic power. Internal Analog-to-Digital (ADC) circuits process analog input updates every 0.4 ms, while output loops update within 0.3 ms. Compatibility and default input state selection depend on CPU/NIU firmware versions; when paired with CPU or NIU version 1.5 or later, input default behavior aligns with the jumper-defined output default configuration.
Frequently Asked Questions
Q: Does the IC200ALG430 require external field power to process input channels?
A: No, input processing circuits operate solely on logic power provided by the backplane bus. External 12 VDC or 24 VDC power is required exclusively for the analog output current loops.
Q: What status indicators are available on the module front panel?
A: The module includes a MODULE OK LED to signal backplane power initialization and a FLD POWER LED to confirm external field voltage presence.
Q: What occurs if user-side field power is lost during operation?
A: Onboard diagnostic tools detect the loss of user-side power and report the fault condition to the central controller.
Field Installation Guidelines
- Mount the module securely into its designated carrier slot on the VersaMax DIN rail assembly prior to applying system power.
- Connect external field power (+18 to +30 VDC or 9.6 to 15 VDC) to supply power for the output loops.
- Wire current signals using shielded twisted-pair cables to mitigate external noise and maintain the 30 dB crosstalk rejection threshold.
- Terminate signal shields to cabinet ground bars or carrier shield terminals according to standard panel wiring practices.
- Verify hardware jumper placement to set desired default failure states (Hold Last State or output default) before commissioning.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
ABB 07KR264 Procontic K200 Basic Configuration Unit
$100.00
$200.00
GE Fanuc 531X123PCHACG1 Power Connection Board
$99.00
$199.00
GE Fanuc DS200LDCCH1 Mark V LAN/Control Communications Board
$99.00
$199.00
ABB 07DC92 GJR5252200R0101 Configurable Digital I/O Module
$100.00
$200.00
Guide
Translation missing: en.general.search.loading